parse
Csv Parser for Java 1.0
Csv Parser for Java - Java class for stream based parsing more>>
Its usable from C#, VB.Net, ASP.Net, or any other .Net language. Its compatible with the 1.0 .Net framework, 1.1, 2.0, and even the .Net Compact Framework. The methods are designed for ease of use, while the inner architecture is designed purely for speed and efficiency.
Parsing is done using the de facto standard CSV file specifications.
It handles quoted fields, delimiters in the data, and even data that spans across multiple lines. Data can be parsed in less than half of the time of any other parser it has been benchmarked against.
Main features:
- Stream based file parsing allowing for parsing of large files without storing the entire file contents in memory
- Simple reader pattern movement through file
- Simple access to field data by index or by field name
- Internal parsing using arrays instead of strings for fast looping over large files
- Uses built in framework functionality to handle most encoding issues instead of guessing or hardcoding
- Includes a CSV writer to ease the worries while creating CSV data. No more needing to worry about what to replace with what to match up with delimiters, text qualifiers, etc.
Enhancements:
- Added Flush method to CsvWriter.
- Added more complex backslash character escapes like ### and o### Octal, x## Hex, d### Decimal, and u#### Unicode.
Charles 2.4
Charles - Web debugging proxi more>>
Charles can act as a man-in-the-middle for HTTP/SSL communication, enabling you to debug the content of your HTTPS sessions.
Charles simulates modem speeds by effectively throttling your bandwidth and introducing latency, so that you can experience an entire website as a modem user might (bandwidth simulator).
Charles is especially useful for Macromedia Flash developers as you can view the contents of LoadVariables, LoadMovie and XML loads. More about Charles and Flash.
Charles is also useful for XML development in web browsers, such as AJAX (Asynchronous Javascript and XML) and XMLHTTP, as it enables you to see the actual XML that is flowing between the client and the server.
Main features:
- Cookies are shown in the HTTP headers, so you can see exactly what cookies you are sending and receiving.
- Every request and response is recorded in Charles. Redirects that are often too quick to see when testing with a web browser can be seen in Charles. Requests from applications other than your web browser (such as Flash movies) can also be seen.
- Request and response sizes are shown in Charles, so you can see how big each request was.
- Assets loaded from an HTML page are recorded so that you can see how many images etc are loaded by a page, and where from.
- All files can be viewed, including JavaScript files, CSS files, HTML files etc.
- Mirror all responses to disk, recording your session.
- Blacklist sites so that requests are blocked.
- See the results of caching by seeing cached responses (304 Not Modified), and requests containing last modified dates (IfModifiedSince).
- Disable caching by removing cache related headers from requests and responses as they pass through Charles, ensuring that you are always requesting the latest file.
- See whether a cache has served your request by looking for cache-hit HTTP headers.
- View encrypted HTTPS traffic in plain text. Enables you to view requests and responses in plain text even when communicating with an SSL secured web server.
- Reveal unexpected requests, such as typos and 404s.
- View requested images.
- Bandwidth Throttle your web connection to a specified bytes/second speed, and millisecond latency. This enables you to simulate modem conditions on a high speed internet connection (bandwidth simulator)
- Spoof DNS name to ip mappings so that you can test a domain name before it has gone live. Very useful for testing your virtual hosting.
- Export to CSV all of the summary data captured by Charles for analysis and reporting in Excel
- Reverse proxy creates ports on the localhost that act as regular HTTP servers, but forward all requests to a specified web server.
- HTTP 1.1 support - including keep-alive, chunking and content-encodings including gzip, compress and deflate.
- External proxy support - configure an proxy for Charles to use to access the Internet
- NTLM authentication support (Windows NT Challenge Response Authentication / Integrated Windows Authentication)
- Automatic configuration of Windows Internet Proxy settings.
- Search all headers and bodies for keywords.
- Port forwarding support, allows any protocol to be forwarded by Charles and debugged.
- Unicode and other charset encoding/decoding support.
- AJAX debugging (Asynchronous Javascript and XML) and XMLHTTP debugging
- AMF parsing to help debug Flash Remoting
- Firefox proxy autoconfiguration
- Automatic Update Checking.
Version restrictions:
- 30 days evaluation.
Enhancements:
- AMF 3 support (thanks to Kevin Langdon for his work on the AMF 3 spec)
- SSL support for IBM JDK (thanks to Lance Bader for helping solve this)
- Automatic Update Checking
- Documentation wiki open to public
- Fixes for JDK 1.3 support
- Better reporting of XML parse errors (showing the line number and column of the error)
- Fix Serializable problem for External Proxy configuration
- Miscellaneous bug fixes and improvements.
PhotoPresenter 2.8
PhotoPresenter is an easy to use, high performance iPhoto library viewer with which you can quickly and easily present your iPhoto library without having to wait for iPhoto to launch and to parse your library. more>>
PhotoPresenter 2.8 is an easy to use, high performance iPhoto library viewer with which you can quickly and easily present your iPhoto library without having to wait for iPhoto to launch and to parse your library. Even large library are displayed very quickly and, thanks to its multithreaded capability, you can interrupt PhotoPresenter at any time. PhotoPresenter uses OpenGL to display very fast 2D and 3D effects: 3D rotation, 3D cube, cross fade, and cross zoom.
CaliBrate 1.7.2
CaliBrate is considered as a simple and easy to use program for all of you to enjoy. more>>
CaliBrate 1.7.2 is considered as a simple and easy to use program for all of you to enjoy with batch processing options
Major Features:
- Batch process iCal events
- Flexible search criteria & range match presets
- Search for and remove duplicates
- Search for annual recurring events and delete later non-recurring duplicates
- Move or archive events to new calendars or delete them
- Auto-reformat, modify, or set event titles, notes, locations, and URLs
- Add or clear alarms and attendees
- Modify or clear recurrences
- Edit, create, and delete individual events in event drawer
- Use an existing event as a template to create a new event in event drawer
- Magic Hat: drag text to it to parse events
- Drag & drop text among fields on event drawer when editing or creating events
- Drag & drop date or time strings to event start and end dates / times
- Save & load search criteria sets
Enhancements:
- Added search option to search for empty recurrences, which are corrupt events on Snow Leopard.
- In actions you can then either delete the event(s) or properly clear or modify these recurrences. If you are experiencing this corruption, MobileMe syncs may fail and you would see frequent sync-related crashes in your system log. If you are not, you should just skip this update.
Magic Hat: drag text to it to parse events. Drag & drop text among fields on event drawer when editing or creating events. Drag & drop date or time strings to event start and end dates / times. Save & loadLicense:Trial
HiBase 1.0b1.3.9
HiBase allows you to connect to your MySQL databases and remotely modify them using a graphical interface more>> HiBase allows you to connect to your MySQL databases and remotely modify them using a graphical interface. Features include spread sheet cell by cell editing, simple but powerful graphical table creation, query recording, tabbed data parsing, graphical query results and more. Chock full of powerful functionality HiBase provides a complete relational database client toolset for the new or learning developer/user to the most seasoned DBAs alike.
MacOS 8.5 or later, MRJ 1.1.5 or later.
cARLO 1.5.5
cARLO - Carracho server log analyzer more>>
cARLO can parse Hotline logs in addition to Carracho logs.
cARLO can analyze raw data logs from Carracho servers and report back statistics.
Every nickname used when a user started a file transfer.A list of files uploaded by a user.
A list of files downloaded by a user.The leech rating of every user on the server sorted by login names or leech ratings.Server wide stats (uploads, downloads, leech rating, and 5 "top 10" lists.
Search for file uploaders by filename.Search for file downloaders by filename.Super fast log analyzing
Features:
- General stats for a user (uploads, downloads, leech rating, IPs)
- Every nickname used when a user starts a file transfer
- A list of files uploaded by a user
- A list of files downloaded by a user
- The leech rating of every user on the server sorted by login names or leech ratings
- Server wide stats (uploads, downloads, leech rating, and 6 "top 10" lists
- Search for file uploaders by filename
- Search for file downloaders by filename
- Report exporting for publishing on the web or as a plain text file
- Version checking
- Support for both Carracho and Hotline logs
- (Unsupported) Automatic report generating
- (Unsupported) Separate user statistics by nickname
Enhancements:
- Fixed bug which prevented the file name of reports from being remembered.
- Fixed progress bar increment math.
- Preferences window now closes when clicking the "Parse Log Files" button.
- Renamed "Parse Logs Files" button to "Save Changes / Parse Log Files" - more appropriate.
- Moved all progress indicators to the toolbar.
- Added "Caching Logs" state to log parsing stages
- Added option to exclude file transfers by anonymous or "guest" users. For this option to work on Hotline logs, the log must begin with the standard "Date/time" string which identifies it as such.
- Added option in preferences to identify unique users by their nickname, as opposed to their account username. This is an UNSUPPORTED FEATURE which allows public servers to separate the statistics of users which do not have an account. Note that this is NOT the recommended way to parse files. This feature was added only because many people requested it and it was rather trivial to add. It is not particularly useful as most users change their nicknames quite often.
- Added the ability to auto-magically save server reports every X hours. This is an UNSUPPORTED FEATURE found in the preferences window. If this option is checked then a report will be generated using the current report settings after X hours and every time you manually parse the logs or launch cARLO. Note that if you enter a value less than 0.0025 as the number of hours between reports (~9 seconds), then the value is ignored and no report will be generated until you change it to a more realistic value ("realistic" would be 0.5 to 2 days). Extended use of this UNSUPPORTED feature over several days will result in very large memory usage. Having smaller log files and increasing the time between reports will minimize this. Relaunching cARLO will temporarily fix the problem. This isnt typically a problem during normal usage, so this "bug" will probably go unfixed. If this bothers you a lot, please make a note of it when you pay your shareware fee, and I will take it into consideration. When enough people have paid for cARLO and expressed concern over this bug that it justifies the time it would take to fix it, I will do so.
- Small 10.2.3 optimizations.
JXMLPad 4.1
JXMLPad will satisfy you with a pure Swing java component/framework for editing XML/XHTML documents. more>>
JXMLPad 4.1 will satisfy you with a pure Swing java component/framework for editing XML/XHTML documents.
Major Features:
- JavaBeans usage: Syntax coloration (tag, string, entities...).
- Document Syntax completion (from the current location) for tag and entities using DTD,Schema,RelaxNG: Look-and-feel plugIn.
- Customizable action toolbar: Customizable coloration for tags, attributes,namespaces.
- Real time Syntax error: Template for easy creation.
- Smart parsing (schema detection): Easy to integrate in your application.
- Several standard actions for XML usage (parsing, search, comment...): Standard Swing EditorKit.
- Real time tree/text synchronization and location: Auto tag closing.
- Customizable with a property file: Sample for JSP/XML editing, applet and standalone usage.
- Unicode: Drag and drop (copy and paste nodes).
- Java 1.4 or later.
PictureSnooperX 1.2
PictureSnooperX is an application for finding out UseNet NewsGroups for binary files when having dinner, at the movies, or doing others. more>>
These binary files are usually pictures (and sometimes executables and HTML files). After finding a binary file, PictureSnooperXdownloads the file, decodes that file, and saves that file to the directory of your choice for later viewing.
Enhancements:
- Improved Performance On Message Parsing
- Fixed An Issue With Pre-G4 Processors
- Various Bug Fixes
Requirements:
- Mac OS 8.5 or later
- CarbonLib.
SiteMap 1.72
Automatically create sitemaps in RapidWeaver more>> Automatically create sitemaps in RapidWeaver
SiteMap is a very easy way to automatically create "SiteMaps" in RapidWeaver. You can create them with either a tree, Alphabet or Category view
Beyond that it also supports the sitemap.xml file to help google parse your site, OPML export to view in OmniOutliner or Omnigraffle and a pre-flight mode that will warn you if you leave any of your pages with nasty defaults + more!
Main features:
- Create a siteindex.xml file for to help google index better.
- Validate that your web page doesnt have any nasty defaults in the title, filename or folder name (such as Untitled Page 3 or page4/pag36.html).
- See this for one users take
- Easily turn off web crawling for a given page within your site.
- And yes, SiteMap can also create SiteMaps in a variety of styles (Including, with version 1.14 your blog entires!)
System requirements:
-
Enhancements
- Fixed a problem where blog posts marked drafts showed up in sitemap.
- Added the ability to output up to 6 column output (up from the previous 2).
- Archive Dates in sitemap now default to being localized to the mac localization settings.
Category view Beyond that it also supports the sitemap.xml file to help google parse your site, OPML export to view in OmniOutliner or Omnigraffle and a pre-flight mode that will warn you if youLicense:Shareware
iFlash 2.8.1
A virtual flash card program which will help you study almost anything. more>> A virtual flash card program which will help you study almost anything.
iFlash is a virtual flash card program which will help you study almost anything. You can enter in the front and back of cards, and have iFlash play them back to you.
iFlash includes many great features to help you study. You can record audio directly into any flash-card (great for foreign languages), as well as attach images. Other features include an unlimited amount of card sides per deck, advanced importing and exporting, iPod support, quick-searching, and a beautiful interface that is strikingly similar to other iApplications (like iTunes and iPhoto).
Print out paper flash-cards
iFlash includes support for printing out flash cards. To access this feature, open the card deck you would like to print, click the File menu and select Print. There are 2 styles of card printing: Vertical style prints both the front and back of your cards onto one side of the paper. For best results, fold the paper in half along the solid line, use glue to merge the paper together, then cut along the dashed line.Two-Sided Cards prints using both sides of the paper.
When you first click Print, iFlash will print all the front sides of your cards. Once completed take the printed stack (do not change the order of how the pages were printed; iFlash takes this into account) and place it back into your printer such that the back sides can be printed. Neither style supports printers that have dual-side printing support.
Use images and audio in your cards
You can drag an image file onto any card, and see it during the card show. iFlash will store audio files and images on a "side" of a card. For example, you can have an image/audio clip on the front side of a card and no multimedia on the back side. Images will show up in their own window during the show.
To record audio, first open the Inspector by clicking the blue "Inspect" buton. Then, simply click the Record button (shown below) in the Inspector. This will record audio from the default input on your Macintosh. If you click on the Audio tab, you can also playback the audio, delete it, and import an external audio file.
If you are unsure what your audio input is set to, open System Preferences (Apple Menu -> System Preferences...), select Sound, then click the "Input" tab. On most Macs the built-in microphone is usually set as the default recording device.
Three Memorization Systems
iFlash has three separate systems of memorization built-in, Simple Memorization, Score Memorization, and Interval Memorization. You can switch between these in the Deck Preferences.
Simple Memorization (good for cramming; on by default in new decks) gives each card two states, either memorized or un-memorized. When a card is "Known" during the card show by clicking the "Known" button, iFlash will mark the card as memorized and it will not be shown again. When simple memorization is enabled, the editor window will show checkboxes next to every card. If the card has a check mark next to it, then it has been memorized.
Score Memorization (good for short-term studying) assigns each card a numerical score. When a card is "Known" during the card show, the cards score gets raised. If the card isnt known during the show, the cards score is lowered. When a cards score reaches the threshold, it is memorized and will not be shown again. All of the thresholds for Score memorization can be customized in the Deck Preferences.
Interval Memorization (good for long-term studying) is based off the Score method above. However, interval studying links each cards score to a number of days. This number of days represents how long a delay there is before you see that card again while studying. When Interval is enabled, cards can never be "memorized" like the above methods.
The iFlash Deck Library
iFlash includes an integrated Deck Library to make downloading, as well as sharing your own card decks, incredibly easy. To access the deck library, simply click the iFlash menu and then iFlash Deck Library. When you first use the library, you will be presented with a login dialog box.
In order to take full advantage of what the library has to offer, you will have to login with your Loopware.com username and password. If you dont have a Loopware.com account, simply click on the Register button to create one for free! Once youve logged in, you may begin immediately download others card decks. Sharing your own card decks is highly encouraged and very easy to do; simply click the Upload button and iFlash will guide you through the process. You can always replace or delete any decks you have uploaded.
Unlimited Card Sides
iFlash includes support for unlimited card sides in each deck. To add a card side, click on the "Deck Prefs", select the "Sides" tab, type in a new name for the side, and click the "+" button. iFlash will then create a new card side for all your cards. You can enable/disable each card side in the card show by checking or un-checking the box next to its name.
To change what order the card sides are shown during the card show, simply drag and drop however you like in the right table view. You can also show any amount of card sides in the editor. To toggle card sides in the editor, click on the "View" menu, highlight "Table Columns...", and choose what you want to be shown in the editor.
iPod Exporting (study on the go!)
To export your card decks to your iPod, click File -> Export and then select Export to iPod. If your iPod is plugged in, simply click "Export" and iFlash will do all the work! You can then access your decks on your iPod by browsing into the iFlash folder (Notes feature) or selecting the deck name (Contacts feature). Because Apple has placed a developer limit on the iPod, and new applications cannot be developed for it, there is no way that studying with your iPod can be as feature-rich as studying directly with iFlash.
Advanced Text File Importing
iFlash includes an advanced text importing feature, accessible from the File -> Import menu item. You can import any text file, and define your own parameters for separating cards, card sides, and line breaks.
iFlash includes 3 preset formats; the 2-Sided Card, Multi-Sided, and Multi-Side With Line Breaks formats. Each format includes an accompanying example of the format. You can define your own separators by selecting the Custom format. When you change any of the separators, click "Re-parse Text File" to see the changes.
System requirements:
- PowerPC G4, G5 or Intel-powered Mac.
Version restrictions:
- 15 days trial period.
Enhancements
- Fixed bug where iFlash would sometimes not export more than a few decks to the iPhone. If this is happening for you, click the "Deck Prefs" button, select the "Advanced" tab, then click the new "Reset Deck Unique ID" button. Do this for each deck thats affected.
- Quotes are now respected when importing CSV files.
- Fixed bug where exporting decks with a ":" or "/" in their name would crash iFlash.
Watson for Hotline 2.6
Watson for Hotline provides you with a very useful and ideal Hotline File search tool which incorporates the 411 Search Engine to provide you with fast and easy search results. more>>
Watson for Hotline 2.6 provides you with a very useful and ideal Hotline File search tool which incorporates the 411 Search Engine to provide you with fast and easy search results. What makes this method so fast? Imagine all the time you waste while searching on the Web. After the server performs the search, your browser has to parse the code, download the images, and display the final result. All of which can take quite a long time on a 56K modem. Watson simplifies the process showing just the results, and nothing else. It even allows you to take advantage of the CacheBack! feature to go back to previous searches without wasting time.
Another feature of Watson is that it tracks your Downloads and Bookmarks. This feature tries to act like ICQ other Instant Messengers. It tells you when the unfinished download can be finished. The same goes for bookmarks. When your favorite server is online, Watson will tell you.
There are other features spread throughout Watson which are for you to find. For Example, click on the bottom right-hand corner of the search box and you'll be able to access previous search words (Kinda like a search history). Other features include the "Hiding" of Watson when it is not in use. But already we're giving away too much. Explore...enjoy...and have fun!
Cast Away 2.9
Cast Away 2.9 is a useful software that helps it users fill in a gap so far left in iTunes implementation of Podcasts and allows for the scheduled removal of podcasts on a per podcast basis. more>>
Cast Away 2.9 is a useful software that helps its users fill in a gap so far left in iTunes' implementation of Podcasts and allows for the scheduled removal of podcasts on a per podcast basis. It also features the automatic playing of podcasts.
Major Features:
- Podcast Removal Features:
- Separate podcast removal settings per podcast subscription
- Separate settings for iTunes and iPod for each podcast
- Separate settings for long and short episodes
- Separate over-rides, such as keep latest and keep unheard
- Global megabyte caps for iTunes and iPod
- Can be scheduled daily if not open, or hourly if open
- Works both with iTunes and with 3rd party podcast applications
- Podcast Playback Features:
- Automatic new podcast episode playing with queue and last track resume
- Add unplayed podcasts to playback stack
- Flexible control of which new episodes to play and when
- Built-in wake up and sleep timers with fading
- More frequent podcast updating than iTunes allows
Enhancements:
- Snow Leopard support.
- Built as 32/64 bit universal in XCode 3.2.
- iTunes 9 support
- Now requires iTunes 8.1 or higher.
- Removal of legacy iTunes support makes podcast removal dramatically faster.
- Podcast file metadata is no longer checked, relying on iTunes release date only.
- Removed options to parse Podcast titles and check modification dates (no longer necessary).
- Added option to treat iTunes U as a podcast playlist.
- Added feature to edit the comment of playing track in iTunes, useful for archive logging.
- Now always purges main list of playlists of any playlist that no longer exists and the special kinds of library playlists (such as Audiobooks, TV Shows, etc.)
- (Those were added unintentially due to bugs in iTunes 8.2.x)
- Podcast episode names now shown in status window while removing podcasts.
- Improved debug logging.
- Debug state is now persistant across launches until toggled on or off.
- Improved abort feature.
- iTunes version checking now anticipates and handles future versions greater than 9.
- Worked around compiler bugs involving containers and genres that affected intel Macs running Leopard.
- Panther no longer supported, use version 2.8.2.
iSubtitle 1.5
iSubtitle is developed with the aim to create soft subtitled movies for iPod (Touch, Classic, Nano), iPhone (2G, 3G, 3GS), Apple TV, iTunes or any QuickTime based player or application. more>>
iSubtitle 1.5 is developed with the aim to create soft subtitled movies for iPod (Touch, Classic, Nano), iPhone (2G, 3G, 3GS), Apple TV, iTunes or any QuickTime based player or application.
The first and only application to take full advantage of Apple's soft subtitle technology. The subtitle tracks are resolution independent and rendered in real-time as you watch the movie. Subtitles are always displayed at the best quality your device can perform. There are support for multiple languages in the same movie file and you can even switch language on the fly as you watch.
If you already have a movie in a format that suits your needs there's no reason to re-encode it, just add the subtitles and you're good to go. If, on the other hand, your movie is not suited for your device you can batch re-encode it straight from within the application. You can also tag your file with metadata so it's easier to find in your growing library of tv-shows and videos. Enjoy!
Major Features:
- Add soft, non-destructive subtitles, that won't change or alter the original movie.
- Subtitles can be turned on/off using the interface of the device or application.
- Complete support for multiple languages in the same file.
- Supported devices are iPod (Touch, Classic, Nano), iPhone (2G, 3G, 3GS), Apple TV.
- Supported applications are iTunes, QuickTime Player or any application that can play a QuickTime Movie.
- Built-in subtitle online search with automatic download, unarchive and parsing.
- Supports all major subtitle file formats like SubRip (.srt), SubViewer 1 & 2 (.sub), SubStation Alpha (.ssa/.ass) and MicroDVD.
- Matroska subtitles, like ssa/ass and srt, are automatically converted to soft subtitle tracks on import.
- Sync subtitles in real-time using the time offset stepper.
- Automatic and manual metadata tagging. - Create chapter markers automatically or manually.
- Batch re-encode movies within the application to support your target device or application.
- Supports speedy re-encoding using the Elgato Turbo.264 or Turbo.264 HD.
- Watch subtitled movies in fullscreen without leaving the application.
Enhancements:
- Now using MP4v2 lib to insert subtitles, chapters and metadata into the movie. This will finally keep the m4v container and avoid almost all crashes.
- File->Save will now be able to save directly back to an m4v container.
- New super convenient subtitle online search with automatic download, unarchive and parsing.
- Subtitle parsing is now properly threaded.
- Metadata for content rating.
- Window title now displays the file name instead of the metada... see all new features
CNS Menu 1.1.5
CNS Menu is a useful tool which allows you to place hierarchal menus anywhere on a FileMaker layout. more>> CNS Menu 1.1.5 is a useful tool which allows you to place hierarchal menus anywhere on a FileMaker layout. When a menu item is chosen, the script of your choice in the database of your choice is performed. Menus can have any number of sub menus and can be displayed with a variety of styles and bullet marks. Creating menus with CNS Menu is as easy as handing the plug-in a return delimited string of menu items to display. Your menu items can have a display name, and a value that can be used in your scripts, so the end user can see useful information such as a customer name while the value can be a Customer ID number.
CNS Menu ships with the "CNS Menu.fp7" example database which includes 15 examples demonstrating ways to use and understand the CNS Menu plug-in. The database is fully unlocked so you can explore every detail.The documentation for each example is also included inline, so you can both examine the example and see its explanation all from one layout. Examples include, QuickMenu, Menu Placement, MenuBuilder, Value List to QuickMenu, Hidden Items, Menu Decoration, Mouse Grabber, Right Click, Data Entry, Layout Navigation, Update Menu Item, Bookmark Example, External XML Menu, and RSS Menu.
CNS Menu has many advantages over its predecessor, SCRIPTit including MenuBuilder in the configuration dialog which allows you to quickly build new menus without having to know XML.
You can then simply use menus built in MenuBuilder in your database, or copy the XML which is generated for you. CNS Menu also includes a brand new way to create menus called "QuickMenus". A QuickMenu takes a return seperated list of items and creates a menu for you without having to know or use any XML.
Major Features:
- Dynamically create popup menus.
- Easily convert return delimited items such as value lists, layout names, and more, into QuickMenus.
- Add styles to menu items such as bold, underline, italic, and any combination of those.
- Add bullets to your menu items including check marks, circular bullets, and diamonds.
- Pass script parameters through menus to your scripts.
- Enable and disable menu items on the fly.
- Update menu items dynamically.
- Precisely display menus using left, top, align, and minWidth.
- Use the built in MenuBuilder to quickly build XML menus without having to learn XML.
- Use modifier keys to display alternate menu items including Shift, Control, Command, and Option.
- Get mouse coordinates with the CNSMenu_GetMouseCoordinates function.
- Get the mouse button number clicked with the CNSMenu_GetMouseButton function.
- Simple data entry by allowing a user to find items quickly through sub menus.
- Display a user friendly menu item, but pass a value such as a Customer ID to your scripts.
- Load an XML menu from your hard drive.
Enhancements:
- Fixed an issue where the "Scrp-LastMenuChoice" old-style function wasnt working.
- Fixed a bug with the plug-in not correctly locating items on inserted menus.
- CNSMenu_GetMenuChoice and CNSMenu_GetMenuValue now return values even if the selected menu item didnt call a script. (This makes it easier to get this information when processing user input all in one script instead of having to parse the value returned from CNSMenu_ShowMenu.)
- Fixed an issue with the MenuBuilder related to the inserted menu bug.
- CNSMenu_VersionAutoUpdate function added.
- Fixed a bug with Developer Passwords.
- Merged in core plug-in updates from other CNS Plug-ins.
- Fixed a bug where CNSMenu_GetMenuName wasnt returning anything.
- Fixed issues with correctly placing menus in FileMaker Pro 10 with its new "Status Bar" is visible.
- Menu positions/Mouse coordinates are now adjusted correctly when the Text Ruler is visible (FMP8+).
- Menu positions/Mouse coordinates are now adjusted correctly when the layout has been scrolled.
- Added CNSMenu_SetLayoutPartHeights function for correctly positioning menus/returning mouse coordinates in List View.
- Menu and font now grow and shrink with the Zoom level of the layout (FMP8+).
- CNSMenu now requires Mac OS X 10.4 and above to accomplish some of the above functionality.
ClipWrap 1.0.2
Allows you to convert your files in QuickTime movies. more>> Allows you to convert your files in QuickTime movies.
Easily rewrap m2t files into QuickTime movies. Faster than transcoding and with no generation loss.
Main features:>
Rewraps - doesnt transcode
- ClipWrap rewraps the video samples from your existing m2t files without re-encoding them. This means that it can convert at high speed, without altering the image quality.
Automatic format detection
- ClipWrap speaks m2t so you dont have to. It automatically parses the files format and chooses the proper output format, so theres no hassle trying to determine the proper settings (frame rate, image size, gamma levels, etc).
Full timecode support
- Timecode is recreated in the new QuickTime movie, so you can recapture from tape later if necessary.
Supports all m2t formats
- Now youre not limited to specific HDV cameras, you can rest assured your m2t files will be compatible with FCP when it comes time to edit.
Automatically recombines spanned files
- If your direct to disk recorder splits files every 4GB, ClipWrap automatically detects these spanned clips and will recombine them into a single seamless QuickTime movie.
System requirements:
-
Version restrictions:
- Only the first one minute of each clip will be converted.
Enhancements:
- Fixes issues with a/v sync on some clips.
- Fixed crash finishing conversion of m2t of very specific audio sample sizes.
- Now will discard first GOP of video if timecode has not yet been detected.
- Now supports clips with the .mpg extension.
