ventilator waveforms
Infiltrator 1.02
Creative sound-shaping tool for stage or home use more>> Creative sound-shaping tool for stage or home use
Infiltrator is a creative sound-shaping tool for use in the studio and on stage, essentially based around two banks of powerful filters. It was principally designed as a powerful vocoder, but has evolved into something much more and is capable of working as a wide range of filtering FX and tools.
The principal purpose of Infiltrator is for vocoding using channel filter banks, as in the classical analogue vocoders. The Vocoder Mode allows the emulation of nearly every kind of classic vocoder architecture, as well as the creation of brand new vocoder sounds.
In addition to the traditional Synthesis and Analysis filter banks, there is a silence/voiced/unvoiced detector, a noise generator and a built-in synthesizer with twin oscillators for creating carrier signals and waveforms internally. There is also a delay FX available on the inputs and outputs for all sorts of echo-based treatments.
Main features:
- Highly detailed control with physical units - e.g. 0.00001 seconds
- Two 24 channel filterbanks with up to 2/4/6/8 pole, with 11 filter types, including Peaking /shelving EQs, bandpass, notch, LP, HP and more
- Re-configurable architecture to create filter channels, EQs, multiband compressors, vocoders
- Multiple compressors/expanders/gates with lookahead
- Sophisticated silence/voiced/unvoiced detector
- Built-in MIDI monphonic synthesiser with twin oscillators and noise generator
- Ring modulation and FM synthesis features
- 8 sets of 3 assignable real time controllers for instant control
- Realtime control of all filterbanks for unheard-of Vocoding FX
- 3 LFOs for controlling the realtime controls to create fantastic automatic manipulation settings
- Quick/full edit modes - different editing levels for speed and simplicity or deep control
- Extensive metering and monitoring of internal signals
- Internal storage of 99 user programs, with over 55 factory setups.
- Dynamic allocation of DSP resources, allowing different configurations to utilize the hardware fully
- Delay FX on the inputs, outputs, or internally in multiband mode for highly unusual frequency dependent delay FX
- Very extensive 150-page manual for getting inside the highly detailed soundskin
- Various minor user interface and internal improvements
- Delay line maximum times extended to 5 seconds
- Added dedicated delay line time parameter smooting: page "Delays:Setup, smoothig: off,1..15"
- Added Real Time Controller (RTC) target parameters, amongst them are Multiband filter x-over lo/hi frequencies
- Improved Multiband filters
- Added Linkwitz Reilly filters in Multiband mode: page "Setup:Common, MB slope: 12db,24dB" 12dB = Butterworth, 24dB = Linkwitz Reilly
- Added noise input in Multiband mode: page "Input:Left/Right, noise: NdB"
PresentArms 1.2.3
PresentArms is a slideshow program more>>
Enhancements:
- Fixed a bug where files brought in via drag-and-drop would be brought in in random order.
Tone Generator 1.0
Tone Generator lets you create audio test tones, sweeps or noise waveforms using your computer or a PDA handheld more>>
Enhancements:
- Added Menu Item -Noise Info
- Some info on different noise types:White-Pink-Brown-Blue.
MetaTrack 1.4
Audio program that displays all sounds graphically using MetaSynth preset pictures more>> Audio program that displays all sounds graphically using MetaSynth preset pictures
MetaTrack displays all sounds graphically using MetaSynth preset pictures and provides a unique visual approach to audio sequencing.
Sounds are displayed not in waveforms but as sonograms and Metasynth pictures.
Main features:
- 16 audio tracks
- Special effects
- Adjustable fades envelopes
- 64 bits mixing
- Graphic sound representation
- Hot-linking to Metasynth
System requirements:
- Power Macintosh or G3 computer
- Au or VST host
- 32 MB Ram
Enhancements
- New hot links with MetaSynth via the new MetaSynth menu
- New effects including 12-band Graphic EQ
- Customizable reverb
- Import/Export Effect Settings
- New loop selection mode
VET-1 Synthesizer 2.1
VET-1 Synthesizer - barebones virtual noisemaker endowed with some weird detuning features more>>
Main features:
- 12-voice polyphonic VST-MAS-RTAS dynamic morphing oscillator wavetable synthesizer plug-in for Cycling 74 Pluggo Runtime,featuring dynamic voice allocation,
- 88 basic single-cycle waveforms and 2 user-editable morphing waveforms. It includes a tuning selector for any integer or fractional equal division of the octave (EDO) in the 5-98 EDO range and an "EDO warp LFO" feature that can be used to modulate the octave divisor in order to obtain special detuning effects ("variable temperament"). It responds to MIDI note-on/off, pitch-bend and modulation wheel data.
- compatible with Pluggo Runtime 3.5.2 (Cycling 74)
- suitable for use with ProTools, Cubase, Logic, Digital Performer and programs like the VSTi Host 3.12X (Defective Records) running on OS X Tiger.
Apple WaveBurner 1.6.1
Apple WaveBurner is designed to be a functional and innovative CD mastering and authoring tool which is simple enough for you to quickly turn out demo discs more>>
Apple WaveBurner 1.6.1 is designed to be a functional and innovative CD mastering and authoring tool which is simple enough for you to quickly turn out demo discs, and powerful enough for you to deliver professional premasters, Red Book-standard CDs, and Disc Description Protocol (DDP) files. The professional effects in Logic Studio make it simple to master the perfect disc. WaveBurner features an intuitive layout with large waveform viewers. Advanced editing and navigation tools. Separate region, track, and plug-in panes. And now graphic parameter automation.
Enhancements:
- Resolves an issue where Mastering Notes were not saved with WaveBurner documents.
- WaveBurner no longer quits unexpectedly if Auto Render is running when a disc is burned.
- Changes to settings in AudioUnit plug-ins are now reliably maintained.
- It is now possible to enter a 12-digit UPC/EAN code.
- WaveBurner no longer sometimes quits unexpectedly if "Revert to saved" is used while a project is rendering.
Oregon State University Webcams 1.4
Oregon State University Webcams - View the current Oregon State University webcams around the campus more>> MilkyTracker is an open source, multi-platform music application for creating .MOD and .XM module files. It attempts to recreate the module replay and user experience of the popular DOS program Fasttracker II, with special playback modes available for improved Amiga ProTracker 2/3 compatibility.
MilkyTrackers key features:
Fasttracker II like, custom graphical user interface with context menus
Supported on multiple platforms including portable devices
Very accurate .XM replay compared to FT2
ProTracker 2/3 playback modes for playing and editing .MOD files
Various resampler options including emulated Amiga 500/1200 sound output
Choose between a modern and a true-to-FT2 editing scheme / keyboard layout
Tabbed user interface for opening and playing up to 32 modules simultaneously and for exchanging data between them
Over 30 imported module formats
Basic archive support for loading zipped, powerpacked and UMX modules directly
Rendering songs/patterns to disk (.WAV) or directly to sample
Powerful sample editor featuring waveform generators
In-depth instrument editor featuring envelope zooming and scaling and support for copying and swapping instruments and samples across tabs
Low latency audio driver support
MIDI In support
Module optimizer
Internal file browser option
Various font sizes for improved visibility of pattern data
Prospective pattern view option
Playing and editing simultaneously
Live mode for seamless pattern changes<<less
PulpMotion Advanced 2.3
PulpMotion Advanced is considered as the next generation slideshow and animation software for your media. more>>
PulpMotion Advanced 2.3 is considered as the next generation slideshow and animation software for your media.
PulpMotion Advanced creates slideshow based on highly customizable themes. It allows you to present your pictures as well as your video in a single animation you can share as video, screensaver or executable player. PulpMotion Advanced makes your pictures come to life with animation created from regions of interest you can easily define with the integrated editor. Your pictures are no more static but reveal a new dimension. You can also record audio comments on the fly, add music and let PulpMotion Advanced take care of the synchronization and sound transitions.
Major Features:
- Simple to use and elegant interface that hides the complexity of the animation and synchronization logic
- Refined workflow with lots of productivity enhancements.
- Performance boost throughout the application.
- Ability to edit all your media (sound waveform, images and video) inside the application.
- Total control over the audio timelines. Ability to record audio comments. Ability to control the respective volume of each sound track. Automatic cross-fades.
- Waveform editor lets you adjust the IN and OUT points in your audio.
- Gorgeous themes with built-in presets. You can choose your preset visually from a browser.
- Very versatile media browser built on top of Core Data for very fast media browsing. Support for multiple Aperture, iPhoto and Lightroom catalogs. Support for exotic datastores such as iDive and MemoryMiner.
- Unique full-screeen media browser. Use all the available screen real-estate and get an additional timeline view to select date ranges for your media.
- Safe frame mode lets you compose your animation with the ouput frame ratio in mind.
- Feature packed export (Quicktime based) including some advanced anti-aliasing and motion blur options.
- More obvious conversion dialog lets you create variants of your master export: choose between formats such as YouTube, AVI, MP4, 3G, etc...
- Standalone player lets you package your compositions as an application.
Requirements:
- Mac OS X 10.4.11 or later
- 1-GHz G4, G5, or Intel-based Mac
- 512 MB of RAM (1 GB recommended)
- Quartz Extreme compatible card (all recent Macs do)
- An iSight camera or DV camera (optional)
- Internet connection required for registration.
Wave Combiner 1.1
Wave Combiner is a simple to use, yet sophisticated utility with which you can create two waveforms by adjusting the amplitude and frequency and see what the combined result is. more>>
Wave Combiner 1.1 is a simple to use, yet sophisticated utility with which you can create two waveforms by adjusting the amplitude and frequency and see what the combined result is. You know how when you play two guitar strings that are almost the same pitch you hear beats? This is because the two sound waves combine and create a new one. This program simulates just that.
Requirements: CarbonLib or Mac OS X
VeeScope Live 1.43
VeeScope Live is popular among many users as a comprehensive ultimate video production tool for Chroma Keying, video monitoring, and special effects shot visualization. more>>
VeeScope Live 1.43 is popular among many users as a comprehensive ultimate video production tool for Chroma Keying, video monitoring, and special effects shot visualization. Veescope displays real-time chroma key, and high and low video level Zebra patterns. It uses the computer's graphics card, instead of the CPU allowing for much better performance. Works with any compatible Quicktime Live video feed such as, an iSight camera, a firewire DV camcorder, or a high-definition broadcast video source.
Major Features:- Real-time Chroma Key Preview Real-time High and Low Zebra patterns
- Vectorscope Waveform monitor
- Direct-to-disk recording from video stream
- 16:9, 4:3, and native codec aspect ratio preview
- Over-scan and Title Safe overlays
- Multiple windows can be used to view more than one video stream at a time
- Save and restore settings
Requirements:
- Core Image compatible graphics card recommended.
- Dual Intel Mac or Dual G5 Mac recommended.
iDevelop 1.0
iDevelop - Brings on your dashboard the latest topics on the iDevelop discussion board. more>> VoiceQ ADR is a fully digital ADR and Foley cueing solution. Scrolling text over video offers actors and technicians a frame-accurate cue for every word, every line, every time. VoiceQ works with Pro Tools to provide a truly unique ADR experience that enhances performance levels and reduces recording times. VoiceQ provides an abundance of simple easy-to-use features for all production and studio professionals freeing them to capitalize on their creative energies.
Features:
* Scrolling synchronised dialogue over video
* Frame accurate cueing
* Multiple cueing options; scrolling text, beeps, streamers and visual countdown
* Display outputs include; scrolling waveform, scrolling ruler, static text and timecode/F&F
* Quick spotting, detection and adaptation functionality
* Feature rich reporting including ADR cue sheets, scheduling and script reports
* Real time on-the-fly script editing
* MIDI time code generator for standalone operation
* Configurable on-screen display and filters
* Simple Drag & Drop features
* Automated line referencing, notes and progress tracking
* Jog wheel option with user definable key mapping
* All international frame rates including feet and frames
* Compatible with QuickTime movies or any external video format
* Standalone or with all Pro Tools systems and incoming MTC sources<<less
Inspector 1.2.2
Inspector - VST audio plug-in for spectrum analysis more>>
Main features:
Technical
- Spectrum analyzer
- Peak or Average
- Fast or Slow
- Customizable alarms for:
- Headroom
- Channel balance
- Number of times audio waveform is clipped
- Number of consecutive samples clipped
- Total number of clipped samples
- Peak meters
- RMS meters
- Channel balance meter
- Customizable meter caution and warning zones
- Headroom displays/readouts
- Clip counters/readouts
- Supports sampling rates up to 192 kHz
- Altivec/Velocity engine optimizations
- Multi-processor/Advanced multi-processor (AMP) capable
Interface
- Enable/disable spectrum analyzer
- Enable/disable individual alarms
- Set individual alarm levels using arrow controls
General
- Integrated SAVE and LOAD
- Supports parameter automation
- Plug-In formats supported:
- Mac OS X:VST, Audio Unit (AU), RTAS
- Windows: VST, RTAS
- Note: Mac OS 9 VST, 1.x version remains available for download but does not include all features of version 1.2.
BeautynHealth Widget 1.0
Allows you to easily search for products on BeautynHealth.com right from your dashboard. more>> Pianos is the third plug-in in our series of hybrid synthesizers which use a set of waveforms/samples as the main oscillator source combined with a powerful synthesizer- and effect section which processes these waveforms. Are you one of those who own a number of VST plugins or Audio Units, but youre not satisfied with the piano sounds in these. Theyre either boring or the piano sounds dont stand out. Youre looking for something more exciting but still piano sounds, then let us recommend Pianos, one of our ambient (piano) plugins.
The plug-in features hundreds of piano recordings and layers which are combined to create a collection of pianos sounds which were very satisfied with. Many of the presets follow our tradition of sounding "ambient", but this plug-in offers a variety of piano sounds. There are traditional acoustic pianos, grand pianos, electric pianos and synth pianos of many kinds.<<less
Monowave II 1.2.0
Free digital waveform synthesizer for your Mac more>> Free digital waveform synthesizer for your Mac
Monowave II is a great example of the kind of thing that only the Chameleon can bring about.
You take one open DSP platform, a load of well written source code and help files, one analog/digital hardware designer and early Chameleon enthusiast, throw in a load of sleepless nights and you get a growing open-source DSP project that anyone can add to.
Monowave is a fat and dirty monosynth based upon the simple synth example code bundled free with the Chameleon Software Development Kit.
Main features:
- 3 Oscillators, each with 256 waveforms and a unique de-res function for lo-fi sound
- 5 input mixer, three oscillators, noise and external input for filtering
- 4 pole 24dB resonating filter with the unique option to sweep between 4 pole, bandpass and 1 pole modes seamlessly
- 3 assignable Realtime Controllers with show function to remind you what it is assigned to
- Comprehensive MIDI CC control for internal parameters
- 128 Patch memory
- Stereo delay line
- 2 LFOs with 64 classic and complex waveforms
- 3 ADSR envelope generators
- Unique routing modulation capabilities such as velocity to osc waveform, or EG to Resonance, for highly expressive sounds
FMOD Wrappers 1.3
The FMOD Wrappers project contains classes and modules that implement a subset of FMODs functionality more>>
This project was initially conceived to overcome the lack of waveform sample memory sharing in REALbasics built-in Sound class. REALbasic 5.5 introduced the Sound.Clone method, which addressed that limitation to some extent, but the Sound class is still far behind in terms of functionality when compared to FMODs features.
Unlike the built-in Sound class, the FMOD Wrapper classes separate the playback mechanism (FMODsound Class) from the sound sample data (FMODsample Class). This allows any FMODsound object to play back and manipulate any FMODsample, regardless if it is already being used by another FMODsound instance. Think of FMODsample as the actual "noise", and FMODsound as a "speaker" that can playback and manipulate any noise passed to it.
Other than that fundamental difference, the FMOD Wrapper classes function in a very similar manner to the built-in Sound class, but also take advantage of some of FMODs more advanced features. The FMODmusic and FMODstream classes by their very nature do not make a distinction between the sample and playback mechanism, and work essentially the same as the built-in Sound class.
