router firmware
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 360
Netopia Router Firmware 3.3
Netopia firmware version 3.3 will be of interest to all customers with routers of serial numbers greater than 6308101. If your serial number is earlier than 6308101, your latest firmware is 3.1.3 more>> Netopia firmware version 3.3 will be of interest to all customers with routers of serial numbers greater than 6308101. If your serial number is earlier than 6308101, your latest firmware is 3.1.3. Information about this Firmware updater can be found on Netopias website. All Netopia router models will benefit from this firmware upgrade.
Requirements:
Netopia Router
<<lessNetopia Router
Download (0K)
Added: 1998-07-18 License: Updater Price:
downloads
Netopia R-Series Router Firmware 4.11.3
Netopia R-Series Router Firmware offers several improvements including PPP over SDSL, improved QOS features, line backup feature which provides all Netopia Routers that allow always-on connectivity more>> Netopia R-Series Router Firmware offers several improvements including PPP over SDSL, improved QOS features, line backup feature which provides all Netopia Routers that allow "always-on" connectivity (R3100-I, R5100, R5200, R5300, R7100, and R9100) with the capability to automatically detect a failure on the WAN interface and then automatically or manually switch to a backup async profile configured for the aux port - with either an analog or ISDN modem. You also have the option of automatically switching back to the primary port once the connection is restored.
Requirements:
Netopia R-Series Router
Netopia R-Series Router
Enhancements:
Version 4.1 adds the following:
<<lessVersion 4.1 adds the following:
- Added tiered access.
- Allow For TOS Bit Prioritization On R7200/R6100/R5300/R5100
- Text Formatted Config Dump
- Improved IPsec Dead Peer detection
- CLI command to display Ethernet MAC address
- SNMP Trap For Changed PPPoE IP Address
Download (864K)
Added: 2003-01-23 License: Free Price:
downloads
Netopia 400/600 Series Router Firmware 3.3.2
Netopia 400/600 Series Router Firmware 3.3.2 is the latest firmware available for the 400/600 series routers, which are light gray on the top shell and have two ethernet ports on the back more>> Netopia 400/600 Series Router Firmware 3.3.2 is the latest firmware available for the 400/600 series routers, which are light gray on the top shell and have two ethernet ports on the back.
Requirements:
Netopia 400/600 Series Router.
<<lessNetopia 400/600 Series Router.
Download (666K)
Added: 1999-08-11 License: Free Price:
downloads
Router IP Address 1.0
Router IP Address - Discover your dynamic IP address more>>
Router IP Address is a small utility for discovering the dynamic IP address assigned by your Internet Service Provider (ISP) when you have a router connecting several computers to a single internet connection (cable modem, DSL, or telephone modem).
Router IP Address is simplicity itself. Just run the program and it displays the IP address that the rest of the Internet sees when you browse or communicate with various service providers. If you have a direct connection to the Internet this number should match that being used by your operating system but if you are using a router or gateway on your local network it will likely be different.
<<lessRouter IP Address is simplicity itself. Just run the program and it displays the IP address that the rest of the Internet sees when you browse or communicate with various service providers. If you have a direct connection to the Internet this number should match that being used by your operating system but if you are using a router or gateway on your local network it will likely be different.
Download (1.1MB)
Added: 2005-08-15 License: Freeware Price:
1561 downloads
Rio 600 Firmware 1.5.6
Rio 600 is a firmware update for the portable Rio 600 MP3 player. Requirements: Diamond Rio600, Rio600 USB Cable, RioPort SoundJam MP 2.1.1 more>> Rio 600 is a firmware update for the portable Rio 600 MP3 player.
Requirements:
Diamond Rio600, Rio600 USB Cable, RioPort SoundJam MP 2.1.1 Software.
<<lessDiamond Rio600, Rio600 USB Cable, RioPort SoundJam MP 2.1.1 Software.
Download (465K)
Added: 2001-05-19 License: Free Price:
downloads
Rio 800 Firmware 1.5.6
Rio 800 contains the firmware needed to connect your Rio 800 MP3 player to your Mac. Requirements: MacOS 8.6 or later, Diamond Rio 800 MP3 player more>> Rio 800 contains the firmware needed to connect your Rio 800 MP3 player to your Mac.
Requirements:
MacOS 8.6 or later, Diamond Rio 800 MP3 player.
MacOS 8.6 or later, Diamond Rio 800 MP3 player.
Enhancements:
Version 1.5.6 adds support for 128MB cards and resolves issues with audible playback.
<<lessVersion 1.5.6 adds support for 128MB cards and resolves issues with audible playback.
Download (476K)
Added: 2001-05-19 License: Free Price:
downloads
SuperDrive Firmware Update
SuperDrive Firmware Update - Improve reliability when accessing DVD and CD media more>>
Delivers updated SuperDrive firmware to improve reliability when accessing DVD and CD media.
For systems: Power Mac G5 (June 2004), Power Mac G5 (Late 2004), and eMac (USB 2.0).
Installing the SuperDrive Firmware Update
Follow these steps to install the update:
1. Save all open documents and quit all applications.
2. Eject any disc that is in the SuperDrive by dragging the disc icon to the Trash.
3. Double-click the SuperDrive Firmware Update icon.
4. Type in your administrator password.
5. Click Update.
If you cannot update the firmware using this program, contact your local Apple Authorized Service Provider or an Apple Store retail location.
Important: Do not reset, shut down, or turn off power to your computer while updating the firmware. Doing so may damage your SuperDrive.
<<lessFor systems: Power Mac G5 (June 2004), Power Mac G5 (Late 2004), and eMac (USB 2.0).
Installing the SuperDrive Firmware Update
Follow these steps to install the update:
1. Save all open documents and quit all applications.
2. Eject any disc that is in the SuperDrive by dragging the disc icon to the Trash.
3. Double-click the SuperDrive Firmware Update icon.
4. Type in your administrator password.
5. Click Update.
If you cannot update the firmware using this program, contact your local Apple Authorized Service Provider or an Apple Store retail location.
Important: Do not reset, shut down, or turn off power to your computer while updating the firmware. Doing so may damage your SuperDrive.
Download (1.8MB)
Added: 2005-05-06 License: Freeware Price:
1773 downloads
Castlewood ORB Firmware 2.2
Castlewood ORB Firmware is the latest release of the removable storage device called the ORB. Readers have reported no new problems after upgrading with this firmware more>> Castlewood ORB Firmware is the latest release of the removable storage device called the ORB. Readers have reported no new problems after upgrading with this firmware.
Requirements:
ORB removable storage drive, System 7.6.1 or later.
<<lessORB removable storage drive, System 7.6.1 or later.
Download (274K)
Added: 2000-03-13 License: Free Price:
downloads
Nomad Jukebox Firmware 2.96
Creative Jukebox Firmware (ver 2.86) for users running Macintosh Operating System 8.6 and above. With this update, you can now perform line-in recordings without any problems more>> Creative Jukebox Firmware (ver 2.86) for users running Macintosh Operating System 8.6 and above. With this update, you can now perform line-in recordings without any problems. Your recordings are also created as albums now, instead of a single file.
Requirements:
MacOS 8.6 or later, SoundJam 2.5.2 or iTunes.
MacOS 8.6 or later, SoundJam 2.5.2 or iTunes.
Enhancements:
Version 2.96 adds more language support, new batter icons, improved track shuffling, improved performance, and better track management.
<<lessVersion 2.96 adds more language support, new batter icons, improved track shuffling, improved performance, and better track management.
Download (871K)
Added: 2002-05-20 License: Updater Price:
downloads
CD Burner Yamaha CRW Firmware 1.0q
CD Burner Yamaha CRW400xx Firmware is a revised version of the standard for supporting 4x writing. It fixes the following problems: There are no problems with the following more>> CD Burner Yamaha CRW400xx Firmware is a revised version of the standard for supporting 4x writing. It fixes the following problems:
- There are no problems with the following.
- ISO9660 recorded in Disk-at-once mode.
- ISO9660 recorded in Track-at-once mode, with single session and the "Close Disc" setting
- Other formats such as CD-DA.
Requirements:
Yamaha CRW4260 or CRW400xx.
<<lessYamaha CRW4260 or CRW400xx.
Download (215K)
Added: 1998-11-30 License: Updater Price:
downloads
Other version of CD Burner Yamaha CRW Firmware
CD Burner Yamaha CRW Firmware is the CDR/RW drivers for the ...CD Burner Yamaha CRW Firmware is the CDR/RW drivers for the YamahaLicense:Free
CD Burner Yamaha CRW Firmware is a revised version of the standard . CD Burner Yamaha CRW Firmware is a revised version of the standardLicense:Updater
Apple DVD-ROM Firmware 1.1
Apple DVD-ROM Firmware is a beneficial and easy to use application which places new firmware on the Apple DVD-ROM drive installed in iMac DV+, iMac DV Special Edition, and Power Mac G4 Cube computers. more>>
Apple DVD-ROM Firmware 1.1 is a beneficial and easy to use application which places new firmware on the Apple DVD-ROM drive installed in iMac DV+, iMac DV Special Edition, and Power Mac G4 Cube computers. This update improves the audio extraction performance of your DVD-ROM drive.
Download (777.3KB)
Added: 2001-01-16 License: update/patch Price:
downloads
Other version of Apple DVD-ROM Firmware
The iMac/Cube DVD-ROM Updater places new firmware on the Apple DVD-ROM drive installed in iMac ...The iMac/Cube DVD-ROM Updater places new firmware on the Apple DVD-ROMLicense:Updater
Apple Mac Pro EFI Firmware 1.0
Apple Mac Pro EFI Firmware - Fixes several Boot Camp & start up issues more>>
This EFI Firmware Update fixes several Boot Camp and start up issues on Mac Pro computers.
After this update has completed successfully, your Boot ROM Version will be: MP11.005C.B01
<<lessAfter this update has completed successfully, your Boot ROM Version will be: MP11.005C.B01
Download (1.6MB)
Added: 2006-09-20 License: Freeware Price:
1140 downloads
Apple G4 CD/RW Firmware 1.1
Apple G4 CD/RW Firmware improves the CD-RW drive responsiveness after waking up from sleep in Mac OS 9 or Mac OS X more>> Apple G4 CD/RW Firmware improves the CD-RW drive responsiveness after waking up from sleep in Mac OS 9 or Mac OS X.
Requirements:
PowerPC G4, MacOS 9.0 or later.
<<lessPowerPC G4, MacOS 9.0 or later.
Download (1.3MB)
Added: 2002-01-09 License: Updater Price:
downloads
Zoom 56K Modem firmware 1.2
56K Uploader is a MicroPhone LT Setting with scripts encoded to update the firmware version of your Zoom 56K External DataFax USA Modem to V1.200 more>> 56K Uploader is a MicroPhone LT Setting with scripts encoded to update the firmware version of your Zoom 56K External DataFax USA Modem to V1.200.
Requirements:
Zoom 56k Modem.
<<lessZoom 56k Modem.
Download (210K)
Added: 1998-01-24 License: Updater Price:
downloads
Sonnet Firmware Updater 3.1
Sonnet Firmware Updater - Installs the Sonnet Firmware Updater and Sonnet Firmware Remover applications more>>
Sonnet Firmware Updater installs the Sonnet Firmware Updater and Sonnet Firmware Remover applications to your computers Mac OS X Applications folder.
Sonnet Firmware Updater will install the firmware patch that is necessary to support Encore/ZIF (700 MHz and faster) and various Encore/ST processor upgrades in the listed compatible computers.
Sonnet Firmware Updater will read the onboard ROM of a New World PowerPC based PowerMac G3 or G4, patch it, and reprogram the ROM. A companion application called Sonnet Firmware Remover will remove the patch.
Enhancements:
- Added support for Power Macintosh G3 (Blue & White) and all Power Mac G4 computers.
- Improved user interface
<<lessSonnet Firmware Updater will install the firmware patch that is necessary to support Encore/ZIF (700 MHz and faster) and various Encore/ST processor upgrades in the listed compatible computers.
Sonnet Firmware Updater will read the onboard ROM of a New World PowerPC based PowerMac G3 or G4, patch it, and reprogram the ROM. A companion application called Sonnet Firmware Remover will remove the patch.
Enhancements:
- Added support for Power Macintosh G3 (Blue & White) and all Power Mac G4 computers.
- Improved user interface
Download (148KB)
Added: 2007-06-11 License: Freeware Price:
877 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above router firmware search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
