radius videovision
Radius VideoVision Transcoder 1.0.1
Radius VideoVision Transcoder is a tool to transcode from Radius VideoVision to Motion JPEG B. more>>
Radius VideoVision Transcoder 1.0.1 is a tool to transcode from Radius VideoVision to Motion JPEG B. To install, put it in the /Library/QuickTime folder then reboot.
Enhancements:
- Fxes compatibility with older Radius encoded video.
Requirements:
- Mac OS X 10.4 or later.
Radius VideoVision Transcoder - Losslessly transcodes from Radius VideoVision to QT formatRadius Benchmarking/Testing Tool 1.0
Radius Benchmarking/Testing Tool - Send rapid authentication requests to a Radius server more>>
For use in stress testing or benchmarking a hardware/OS combination for running a Radius Server.
This RADIUS (Remote Authentication Dial-In User Service) client program sends radius authentication requests to any IETF standards based radius server.
It is useful in determining performance metrics for comparing different radius servers. It can also assist in determining which versions of a computers OS and hardware platforms will provide the most performance.
Most radius servers support, and are configured to provide, both Authentication (RFC#2138) and Accounting (RFC#?) services. This program only tests the Authentication service.
A modern G4 running MacRadius will handle a sustained rate of over 60 authentications a second! (and, although nobody would ever run it that way, without logging turned on it can handle over 2100 a second).
Gravitic Screensaver 4.0
A free retro-looking yet modern screensaver for your mac based on the laws of physics. more>>
Years ago I was asked to develop a little animation for a wait screen for a software on Windows. They simply wanted to have a ball move in a box and bounce on the sides of the box.
Well, that was boring! So I started adding some force fields and interactions to the balls. To visualize a force field, typically one will use lines, arrows, or some sort of vector-like graphic. While testing my software, at some point I got interested in the intensity alone. Not the direction. To represent the scalar I used a circle which radius would be linked to the intensity of the force-field at that point. I liked the visual of it. Actually, I liked it so much that I turned my wait screen into a screensaver.
Adun 0.71
Adun is a new biomolecular simulator developed by the Computational Biophysics and Biochemistry Laboratory more>>
Enhancements:
New Features and Improvements
- Minimisation
- BFGS, Conjugate Gradient and Steepest Descent algorithms available
- Initial short minimisation step added before initial production loop.
- Improved handling of exploding simulations
- On detecting an exploding simulation AdunCore transparently
- Rolls back the simulation to a previous state
- Performs a minimisation
- Restarts the simulation from the rolled back state.
- Improved container functionality
- Van der waals radius used to define exclusion volume on insertion of a system.
Bug Fixes
- Fixed critical bug that affected temperature stability.
- Fixed critical bug preventing use of Charmm & Amber.
- As a result of this fix its no longer necessary to specify the type of of Lennard-Jones function used by a force field.
Astro IIDC 4.05.03
Astro IIDC is designed to work with a wide variety of low and high end, color or monochrome, 8 or 16 bit FireWire 400 or FireWire 800 cameras. more>>
Astro IIDC 4.05.03 is designed to work with a wide variety of low and high end, color or monochrome, 8 or 16 bit FireWire 400 or FireWire 800 cameras. It has a simple intuitive interface, can record movies, grab frames, grab averaged frames, grab sums of frames, has extensive Altivec / SSE3 optimization for real time processing for flat field, dark frame, image alignment and stacking, supports movie recording as fast as 240 frames per second to disk or as long as 1 hour per frame.
The application utilizes industrial strength Altivec / SSE3 optimized IIDC/DCAM Version 2.0 Framework to control the camera and extracts the raw bayer or monochrome images from the CCD. "Astro IIDC" requires a PowerPC G4 / G5 Desktop or Powerbook OR any MacIntel.
Major Features:
- Simple and easy to use interface in a single camera control window as shown in the screen snap shot to the right. All camera control adjustments are done with a full size scrollable live preview image so there is none of this modal QuickTime tiny 160x120 pixel image approximations nonsense, pure WYSIWYG.
- Works with most inexpensive monochrome or color FireWire web type cameras (see list at page bottom for details).
- Works with most high end 640x480 to 4096x4096 size, 8 and 16 bit per pixel, monochrome or bayer color FireWire 400 and Firewire 800 cameras (see list at page bottom for details).
- Utilizes ASC's industrial strength, preemptively multi threaded, Altivec / SSE3 enhanced IIDC/DCAM framework code, with no dependency on QuickTime or other FireWire drivers for camera control. "Astro IIDC" directly accesses the FireWire camera and extracts the raw bayer or monochrome CCD data. No YUV color aliasing as decode the bayer color data using own custom 2x2, 3x3 and 5x5 kernels.
- For inexpensive FireWire cameras provides extended CCD exposure times from as fast as 1/3000th of a second down to 1.029 seconds, without any hardware modifications. That is 31 times more light gathering capability than anyone else's software and adds a new dimension for lower light imaging.
- For high end FireWire cameras provides CCD exposure times from 1/10000 of a second to 60 minutes (depending on the camera), Region Of Interest and records movies as fast as 240 frames per second.
- Supports user definable Average and Spot Color Balance, allowing you to balance against any color you want, not just white.
- Single click to Grab a frame, Grab a user defined burst of frames and average them (for noise reduction) or Grab a burst of frames and sum them (for enhancing low light imaging). Supports frame grabs in TIFF (Mono8, Mono16, RGB24 or RGB48), PNG (8 or 16 bit), BMP, PhotoShop, PICT, JPEG and FITS (Mono8 or Mono16 bit) file formats.
- Guiding Provides Auto Guiding on stars, planets, lunar craters and solar sunspots utilizing KeySpan's USB to Serial Port converter or Shoestring Astronomy's GPUSB ST4 converter for mount control. Supported mounts include Meade compatible (including LXD55, LXD75, ETX90, ETX125, LX200, RX400, SkySensor 2000 PC etc.), Losmady, Celestron, Meade, Temma, Vixen, SkyWatcher and other mounts that have a ST4 type Auto Guider port and hacked hand controllers (Orion EQ2/3, CGE5 etc.).
- Supports Altivec / SSE3 enhanced Flat Frame division and Dark Frame subtraction to provide for real time removal of optical imperfections (i.e. dust, hairs, vignetting etc.) and to reduce CCD noise.
- Provides live Sharpness estimators using pixel edge detection or FWHM / HFD for a focussing aid and can also be used to exclude air turbulence blurred images from being grabbed as frames or recorded in a movie.
- Logs all your camera settings for every frame grabbed or movie recorded to a text file, so that you can easily recall exactly what settings were used when each image image was captured. Also allows you to enter user notes notes for each frame grabbed or movie recorded.
- Records QuickTime Movies at frame rates up to 240 frames per second down to as slow as 1 frame per minute, user selectable. All movies are recorded with a Greenwich Mean Time relative Time Code track, so that the time for each recorded frame can be determined within 1 frame duration.
- Imageprocessing Provides a 16 bit LRGB64 bit Altivec optimized real time Image Processing Module, featuring multi radii spatially dependent sharpening, log square root curve stretching, RGB level adjustments, RGB gain adjustments, RGB Saturation, R and B color channel spatial offsets for atmospheric correction, multiple noise reduction algorithms and zoom.
- Provides multi - threaded real time automated alignment and stacking of video, both for live image capture and post with recorded 8 or 16 bit per pixel movies. All Altivec enhanced stacking, sharpening, aligning and processing is done at a full 32 bits per color channel (Mono32 or RGB96) so that no image data is lost or compromised.
- Allows you to automatically or manually select which frames are included for stacking. Provides up to 500 user selectable areas of interest for Multiple Area Processing (MAP).
Supports display and capture in color, monochrome, binned 2x2 color, binned 2x2 monochrome, binned 4x4 monochrome and individual red, green or blue color channels modes. - Support external hardware trigger modes 0 and 14, which allows you to externally trigger frame delivery (on GPIO0 or GPIO3 inputs) to the monitor, for frame grabs and recording movies.
- Saves and restores up to 10 user definable camera settings, so you can apply camera specific parameters at a key stroke or via an AppleScript.
- Allows you to measure differential or absolute Photometric magnitudes and generate sub arc second Astrometric positional measurements on stellar objects from imported images or over time from movies. Now you can measure variables star brightness changes, identify positional changes of asteroids or comets and search for extra solar planets on your Mac.
- Provides support for Digital SLR camera users to create RGB48 bit movies from their images, do dark frame subtraction, apply flat frame correction or stack and align your 16 bit movies.
- Apple Script support for starting or stopping Video Play, starting or stopping Movie Recording, Grabbing Frames, Dark Frames, Flat Frames and programatically changes settings.
Enhancements:
- Addresses an issue with a sporadic crash when using binning 4x4 with 16 bit cameras and also changes how the MSR error for magnitude estimation is reported within the Image Processing Module.
Requirements:
- Tiger OS X 10.4.x or higher (up to and including Leopard OSX 10.5.8) and QuickTime 7.x or higher.
- Legacy PowerPC version requires OSX 10.3.9 or higher and QuickTime 7.x or higher.
time Image Processing Module, featuring multi radii spatially dependent sharpening, logLicense:update/patch
DeFish 2.1.1
DeFish is a program equipped with the capability of making environment maps from photographs. more>>
DeFish 2.1.1 is a program equipped with the capability of making environment maps from photographs.This application makes use of technology that was widely published in 1986, 5 years before any fish-eye patents.
The intent is to provide enough capability to project a fisheye image to a perspective image, thereby allowing the user to use the perspective images in other environment map authoring software, such as Apple's QuickTime VR Authoring Studio. The primary advantage to this technique is to capture a much larger field of view than that
This software has been tested on a variety of fisheye images, from 16 mm to 6 mm equivalents. It is simple to calibrate for center and radius by clicking and dragging. A provision is made for barrel distortion correction, but it isn't very easy for even the expert to use; this is something for a future revision.
VectorWorks Updater 2009 SP 4
This single download will update ALL VectorWorks 11.5.0 products. more>> This single download will update ALL VectorWorks 11.5.0 products.
VectorWorks is currently the best selling CAD software on the Mac and an industry standard on Windows. With over 150,000 users in over 80 countries, it is one of the worlds most popular CAD programs.
Engineered to meet the specific needs of smart-sized companies, VectorWorks 10 has everything you need for precision 2D drafting, powerful 3D modeling and sophisticated client presentations.
Plus, VectorWorks has built-in spreadsheet and database capabilities to track costs and materials, and flexible scripting language to automate routine drafting tasks.
Main features:
- This single download will update ALL VectorWorks 11.5.0 products (ARCHITECT, LANDMARK, MECHANICAL, SPOTLIGHT, VectorWorks, and RenderWorks) to version 11.5.1. If you are currently using a version prior to 11.5.0, you must first install 11.5.0 and then update to 11.5.1 using this updater.
System requirements:
- Registered VectorWorks 11.
- Product serial number.
Enhancements
- B056597 - Hatches dont show up in Section Viewports
- B058006 - Balusters dont connect well with handrails if number of tread is changed
- B062374 - Cursor remains active when Saving or Printing
- B062878 - 180 degree curved stair landing fails
- B066402 - VW2009 Stair tool - Stair elevation incorrect
- B067030 - Stair, Handrail on winder has weird bump
- B067176 - Stair PIO - Top and Bottom extensions have incorrect geometry
- B067535 - Stair PIO - Stringer geometry not properly resolved at landing
- B067539 - Stair dialog: new controls do not have help text.
- B067553 - Stairs: heights are not correct with various stringer settings.
- B067809 - Menu "Previous Selection" highlighting does not work
- B067925 - Stairs: dialog settings in "Flights and Platforms" pane are applied differently.
- B068368 - Editing while in Edit mode of various object types like Symbols, Additions, etc
- B068492 - Section Lines prevent Fit Walls to Roof command to succeed
- B068646 - VW 2009 beta 4 will not import a PDF exported from it.
- B068670 - Stair - platform stringers not modelling correctly
- B068903 - Switch to VW when in another space can mess with tool palettes
- B069141 - Multiple selection by Marquee broken
- B069196 - File icon missing on Mac if .vwx is missing
- B069247 - Memory error happens
- B069311 - Localization_[Confirmation of content] -Stair.vso
- B069705 - Localization_Improper Grid values -SmartCursor Settings
- B069941 - VW icon missing from Check for Updates dialog on Mac 10.5.5
- B069982 - Railing on Circular Stair Is Badly Segmented
- B070187 - VW shut down ( Sketch Style of Resource Browser ).
- B070714 - With Text Boxes selected Cursor willnot change to move text box
- B070901 - stair, handrail is cut but rails continue
- B070919 - Cmd ~ key doesnt tab through open VW windows
- B070972 - Spanish Export QuickTime VR Object dialog inconsistency
- B071553 - Stair top tread toggle fails at upper floor
- B071556 - Stair dashed run incorrect
- B071691 - Stair Guard Rail following Lenght of Handrail even though setting implies otherw
- B071851 - Problem during rectangle editing
- B071939 - SetFile not a part of the installer for Snow Leopard, VW fails to launch
- B071963 - Stairs: treads move in 3D when stringers set to None
- B072414 - Accidently double clicking one of the colors crashes Vectorworks.
- B072548 - VW-2009 SP2 Updater Letter O vs Zero
- B072567 - Remote Logging
- B072631 - Sweeps are not always providing Along Line and Midpoint snaps
- B072998 - Section Viewport Section Line Marker Instances are not holding the by Class Sett
- B073091 - Selection a custom leaf door symbol is inconsistent in VW2009 sp2
- B073232 - Vectorworks Crashing Upon Close
- B073332 - Crash when on WorkspaceManagerShutdown
- B073437 - Eccesive file size from importing Autocad files to 2009
- B073502 - Guardrails on a Platform- U do not connect properly with straight stair
- B073585 - Stair Object -Stringer Does Not Follow Intended Path
- B073596 - purging issue - resubmitted
- B073617 - Installers: Special Characters not recognized and displayed as garbage
- B073618 - Random crash at shutdown.
- B073631 - Column PIO: Taking extraordinary long time to change height parameter
- B073640 - Setting Curb Width to 0 in Road T corrupts PIO and drawing
- B073661 - Stair PIO - Platform Stringer Geometry not correct
- B073662 - Stair PIO - Handrail/Guardrail "elbows" broken, no solid transition
- B073680 - Purged except objects and textures
- B073683 - Stair PIO: The Guardrails not aligned properly in a curved platform
- B073693 - Lose control of 14.0.x b102577 when selecting Window PIO
- B073793 - MAC: Speed problem with attached file
- B073826 - Stair PIO Outside Stringer -Geometry is Incorrect
- B073855 - Purge unused objects can multiply vw file sizes up to 5 times
- B073866 - The "Add surface" command does not work to specific polygon objects.
- B073893 - Section Viewport Annotation Marker by class not depicting correctly
- B073931 - VW2009 crashes when add Surface is performed within test file Regression
- B073947 - "Unfold Surface" command cant Unfold a simple Surface
- B073961 - More crashes during InteractiveObjectDraw
- B073976 - Editing User Field in Window PIO causes an extended "freeze" of VW
- B073978 - VW2009 takes much longer to Add Surface of rectangles after Undo is performed
- B073981 - Custom door leaf applies the incorrect leaf to doors
- B073989 - SP3 Stair - 2D stair break tread showing as black filled triangle.
- B074022 - If I choose "Gross" , the space is not displayed in 3D view.
- B074023 - Difficulty selecting custom leaf in Door PIO
- B074033 - Crash in wall reset when opening GS-VWAxCheck.vwx
- B074111 - About " Export as Vectorworls 12 File ".
- B074112 - Square number of sheets of the number of copies that I set is printed.
- B074115 - Fill color is applied to text
- B074174 - Annotation Section Veiwport Markers when by class the same fill as not by class
- B074182 - odd complex polyline handling
- B074185 - MAC: Snap to a extrude doesnt work if the extrude is not at the internal origin
- B074223 - The thickness of the line on the drawing sheet is influenced by the "Scaling".
- B074292 - Window and Door objects in Section Viewports not taking on Section Style Beyond
- B074324 - Spotlight Instrument Insertion Tool fails to set Symbol unless symbol has 3D
- B074339 - Wireframe for extruded polyline is slower than it could be
- B074351 - Create Joists from Poly tool used next larger stock width in Quantity Label fiel
- B074387 - Missing Round wall in SP3, SP2 works fine.
- B074416 - If Updater/Installer cant set permissions on a file, it never sets app +
- B074419 - Serial number should be converted to all upper case.
- B074438 - Shut down (Choose VW Plants)
- B074439 - Japanese character becomes "Mojibake".(viewer)
- B074449 - BugsTS Incorrect Spaces from walls in 3d view
- B074451 - BugsTS Space Report values not correct.
- B074475 - Lighting Device
- B074525 - Export to DWG fails, then cant be re-initiated
- B074536 - File Limit Crash
- B074549 - Repeatable crashes when multiple files are opened : JBC
- B074618 - Stair PIO - Editing Stair parameters causes a duplicate stair to be created
- B074625 - Crash drawing PDF Page object.
- B074631 - Clipping crash.
- B074632 - Split crash.
- B074697 - Add Surface Command Doesnt Work for Certain Polygon Configurations
- B074711 - Infinite loop created when using Align Distribute when editing symbol
- B074725 - Add surface fails
- B074814 - Extrude along Path - incorrect result with nurbs curves profile.
- B074841 - No sizes shown for BSI Universal Beam choice in Framing Member
- B074870 - Only 3D Objects show selection indication using Sketch Styles.
- B074917 - Framing Member-Logic for Bottom Bearing" option on OWSJ is reversed
- B074920 - Stair PIO: Handrail disconnect issue in Winder U Platform
- B074926 - MAC: Symbols in walls lost all the 3D wall breaks
- B074931 - Framing Member-2D Display options for Open-Web Steel Joists are incorrect
- B074990 - MAC: "Purge Unused Objects..." enlarged the file size
- B075029 - Stair PIO -Incorrect Stringer Geometry for Underneath Stringer
- B075109 - Curved Platform with Certain Angle/Radius Combinations Cause Incorrect Geometry
- B075123 - Stair PIO -Curved Platform with Inset 3D Handrail -Handrail Missing Segments
- B075147 - Stair Settings Dialog -Settings Revert After Tab is Changed
- B075151 B056597 - Hatches dont show up in Section Viewports
- B058006 - Balusters dont connect well with handrails if number of tread is changed
- B062374 - Cursor remains active when Saving or Printing
- B062878 - 180 degree curved stair landing fails
- B066402 - VW2009 Stair tool - Stair elevation incorrect
- B067030 - Stair, Handrail on winder has weird bump
- B067176 - Stair PIO - Top and Bottom extensions have incorrect geometry
- B067535 - Stair PIO - Stringer geometry not properly resolved at landing
- B067539 - Stair dialog: new controls do not have help text.
- B067553 - Stairs: heights are not correct with various stringer settings.
- B067809 - Menu "Previous Selection" highlighting does not work
- B067925 - Stairs: dialog settings in "Flights and Platforms" pane are applied differently.
- B068368 - Editing while in Edit mode of various object types like Symbols, Additions, etc
- B068492 - Section Lines prevent Fit Walls to Roof command to succeed
- B068646 - VW 2009 beta 4 will not import a PDF exported from it.
- B068670 - Stair - platform stringers not modelling correctly
- B068903 - Switch to VW when in another space can mess with tool palettes
- B069141 - Multiple selection by Marquee broken
- B069196 - File icon missing on Mac if .vwx is missing
- B069247 - Memory error happens
- B069311 - Localization_[Confirmation of content] -Stair.vso
- B069705 - Localization_Improper Grid values -SmartCursor Settings
- B069941 - VW icon missing from Check for Updates dialog on Mac 10.5.5
- B069982 - Railing on Circular Stair Is Badly Segmented
- B070187 - VW shut down ( Sketch Style of Resource Browser ).
- B070714 - With Text Boxes selected Cursor willnot change to move text box
- B070901 - stair, handrail is cut but rails continue
- B070919 - Cmd ~ key doesnt tab through open VW windows
- B070972 - Spanish Export QuickTime VR Object dialog inconsistency
- B071553 - Stair top tread toggle fails at upper floor
- B071556 - Stair dashed run incorrect
- B071691 - Stair Guard Rail following Lenght of Handrail even though setting implies otherw
- B071851 - Problem during rectangle editing
- B071939 - SetFile not a part of the installer for Snow Leopard, VW fails to launch
- B071963 - Stairs: treads move in 3D when stringers set to None
- B072414 - Accidently double clicking one of the colors crashes Vectorworks.
- B072548 - VW-2009 SP2 Updater Letter O vs Zero
- B072567 - Remote Logging
- B072631 - Sweeps are not always providing Along Line and Midpoint snaps
- B072998 - Section Viewport Section Line Marker Instances are not holding the by Class Sett
- B073091 - Selection a custom leaf door symbol is inconsistent in VW2009 sp2
- B073232 - Vectorworks Crashing Upon Close
- B073332 - Crash when on WorkspaceManagerShutdown
- B073437 - Eccesive file size from importing Autocad files to 2009
- B073502 - Guardrails on a Platform- U do not connect properly with straight stair
- B073585 - Stair Object -Stringer Does Not Follow Intended Path
- B073596 - purging issue - resubmitted
- B073617 - Installers: Special Characters not recognized and displayed as garbage
- B073618 - Random crash at shutdown.
- B073631 - Column PIO: Taking extraordinary long time to change height parameter
- B073640 - Setting Curb Width to 0 in Road T corrupts PIO and drawing
- B073661 - Stair PIO - Platform Stringer Geometry not correct
- B073662 - Stair PIO - Handrail/Guardrail "elbows" broken, no solid transition
- B073680 - Purged except objects and textures
- B073683 - Stair PIO: The Guardrails not aligned properly in a curved platform
- B073693 - Lose control of 14.0.x b102577 when selecting Window PIO
- B073793 - MAC: Speed problem with attached file
- B073826 - Stair PIO Outside Stringer -Geometry is Incorrect
- B073855 - Purge unused objects can multiply vw file sizes up to 5 times
- B073866 - The "Add surface" command does not work to specific polygon objects.
- B073893 - Section Viewport Annotation Marker by class not depicting correctly
- B073931 - VW2009 crashes when add Surface is performed within test file Regression
- B073947 - "Unfold Surface" command cant Unfold a simple Surface
- B073961 - More crashes during InteractiveObjectDraw
- B073976 - Editing User Field in Window PIO causes an extended "freeze" of VW
- B073978 - VW2009 takes much longer to Add Surface of rectangles after Undo is performed
- B073981 - Custom door leaf applies the incorrect leaf to doors
- B073989 - SP3 Stair - 2D stair break tread showing as black filled triangle.
- B074022 - If I choose "Gross" , the space is not displayed in 3D view.
- B074023 - Difficulty selecting custom leaf in Door PIO
- B074033 - Crash in wall reset when opening GS-VWAxCheck.vwx
- B074111 - About " Export as Vectorworls 12 File ".
- B074112 - Square number of sheets of the number of copies that I set is printed.
- B074115 - Fill color is applied to text
- B074174 - Annotation Section Veiwport Markers when by class the same fill as not by class
- B074182 - odd complex polyline handling
- B074185 - MAC: Snap to a extrude doesnt work if the extrude is not at the internal origin
- B074223 - The thickness of the line on the drawing sheet is influenced by the "Scaling".
- B074292 - Window and Door objects in Section Viewports not taking on Section Style Beyond
- B074324 - Spotlight Instrument Insertion Tool fails to set Symbol unless symbol has 3D
- B074339 - Wireframe for extruded polyline is slower than it could be
- B074351 - Create Joists from Poly tool used next larger stock width in Quantity Label fiel
- B074387 - Missing Round wall in SP3, SP2 works fine.
- B074416 - If Updater/Installer cant set permissions on a file, it never sets app +
- B074419 - Serial number should be converted to all upper case.
- B074438 - Shut down (Choose VW Plants)
- B074439 - Japanese character becomes "Mojibake".(viewer)
- B074449 - BugsTS Incorrect Spaces from walls in 3d view
- B074451 - BugsTS Space Report values not correct.
- B074475 - Lighting Device
- B074525 - Export to DWG fails, then cant be re-initiated
- B074536 - File Limit Crash
- B074549 - Repeatable crashes when multiple files are opened : JBC
- B074618 - Stair PIO - Editing Stair parameters causes a duplicate stair to be created
- B074625 - Crash drawing PDF Page object.
- B074631 - Clipping crash.
- B074632 - Split crash.
- B074697 - Add Surface Command Doesnt Work for Certain Polygon Configurations
- B074711 - Infinite loop created when using Align Distribute when editing symbol
- B074725 - Add surface fails
- B074814 - Extrude along Path - incorrect result with nurbs curves profile.
- B074841 - No sizes shown for BSI Universal Beam choice in Framing Member
- B074870 - Only 3D Objects show selection indication using Sketch Styles.
- B074917 - Framing Member-Logic for Bottom Bearing" option on OWSJ is reversed
- B074920 - Stair PIO: Handrail disconnect issue in Winder U Platform
- B074926 - MAC: Symbols in walls lost all the 3D wall breaks
- B074931 - Framing Member-2D Display options for Open-Web Steel Joists are incorrect
- B074990 - MAC: "Purge Unused Objects..." enlarged the file size
- B075029 - Stair PIO -Incorrect Stringer Geometry for Underneath Stringer
- B075109 - Curved Platform with Certain Angle/Radius Combinations Cause Incorrect Geometry
- B075123 - Stair PIO -Curved Platform with Inset 3D Handrail -Handrail Missing Segments
- B075147 - Stair Settings Dialog -Settings Revert After Tab is Changed
- B075151 - Stair PIO -Guardrail Disconnected on Winder-type Stair
- B075211 - Site model shows anomalous ridge
- B075307 - VW 016 - Offset tool - Nurbs always duplicated to the outside
- Stair PIO -Guardrail Disconnected on Winder-type Stair
- B075211 - Site model shows anomalous ridge
- B075307 - VW 016 - Offset tool - Nurbs always duplicated to the outside
Arcs & Sectors 1.0
Middle-School (grades 5 through 9) math program written to provide skills in context. Given the radius or diameter of a circle, and the measure of a central angle, students must find the following: more>> Middle-School (grades 5 through 9) math program written to provide skills in context. Given the radius or diameter of a circle, and the measure of a central angle, students must find the following: the area of the circle; the area of the sector defined by the central angle; the circumference of the circle; the length of the arc defined by the central angle. All answers are rounded to the nearest hundredth.
MacOS 7.0 or later.
Strata 3D Pro Updater 3.8.1
Strata 3D Pro 3.8.1 Updater will patch version 3.8. Requirements: Strata 3D Pro 3.8. Enhancements: Version 3.8.1 fixes the following: Resource Palette Saving Hair crash when using tile to preview more>> Strata 3D Pro 3.8.1 Updater will patch version 3.8.
Strata 3D Pro 3.8.
Version 3.8.1 fixes the following:
- Resource Palette Saving
- Hair crash when using tile to preview
- Ripples inverted positioning
- Ripples Layer pop-up menu crash
- View fit to bad data
- Pixelized strip in renderings
- Some interface tweaks
- Old version files crashing when imported or opened in 3.8
- Raytracer "Maximum Block Size" settings adjusting for the presets.
- Lighting presets Fall-off distance and Light Source Radius entry fields inverted
- Fountain read crash
- A situation with the Windows Manager that would result in a -108 error (Out of Memory)
- Slowdown in Renderings on Dual Processors
Apple OS X Server Admin Tools 10.5.5
Apple OS X Server Admin Tools has come as a helpful installer package which is designed with tools for remote server administration. more>>
Apple OS X Server Admin Tools 10.5.5 has come as a helpful installer package which is designed with tools for remote server administration. These applications require Mac OS X version 10.5 or later. Use the Server Assistant application to install or set up Mac OS X Server on a remote computer. Server Assistant is primarily used for the set up of Xserve systems without an attached display.
Enhancements:
- Can now correctly enable and show the status of RADIUS or Kerberos authentication for the PPTP VPN service
- RADIUS service now reliably displays the primary IP address for 802.11n-enabled AirPort Base Stations
- Server Admin can now sort by Value in the Zones tab of the DNS service
- Includes other improvements.
RendezvousWithVesta 1.0.1081
RendezvousWithVesta - accurately simulate the dynamics of a spacecraft orbiting the asteroid (4) Vesta more>>
The motivations for developing this tool are:
- understand how the physical parameters of Vesta affect the stability of low polar orbits;
- understand how the physical parameters of Vesta and the orbital elements of DAWN affect the coverage of Vestas surface;
- provide a fast and reliable tool for the generation of orbits suitable for input in the Science Opportunity Analyzer (SOA) tool.
The output files generated are:
- a SPICE SPK kernel describing the orbit of DAWN around Vesta,
- a formatted ASCII data file containing information about DAWNs orbit, phase angle, and equatorial coordinates with respect to Vesta; see the header of the file for more details;
Main features:
- validated numerical algorithms, tested on NEAR mission data, and capable of accurately reproducing NEARs orbit around Eros;
- complete control over Vestas physical properties: mass, mass distribution model, shape model, rotation period, and pole ecliptic latitude and longitude;
- control over DAWNs initial orbit around Vesta: epoch, radius, equatorial (Vestas equator) inclination, phase angle;
- export simulations as SPICE kernel files and as ASCII data files;
- 3D graphical visualization of the numerical simulation, including the ground tracking of DAWN over Vestas surface;
- 2D plot of the altitude of the spacecraft and of the Vesta profile at nadir;
- completely open source and part of the ORSA framework;
- support for all major platforms: Linux, Mac OS X, Windows;
Area Properties 3.6
Area Properties is of the capability of calculating the area, perimeter, volume, moment and product of inertia, radius of gyration of any object saved as a PICT or Paint file (or on clipboard) properly. more>>
Area Properties 3.6 is of the capability of calculating the area, perimeter, volume, moment and product of inertia, radius of gyration of any object saved as a PICT or Paint file (or on clipboard) properly. Would be of interest to engineers or education.
Requirements: System 7 or higher
OmniGraffle Pro 5.2
OmniGraffle Pro 5.2 is such a clear and easy to use program which allows you to create amazing-looking diagrams that communicate information far better than words - and if youre just looking to make a poster for your Sunday garage sale, its perfect for that too. more>>
OmniGraffle Pro 5.2 is such a clear and easy to use program which allows you to create amazing-looking diagrams that communicate information far better than words - and if you're just looking to make a poster for your Sunday garage sale, it's perfect for that too.
Diagrams are basic to the way people think, and we create them all the time without even realizing it. Whatever your profession or interests, chances are you've occasionally sketched out some ideas on a piece of graph paper or the back of a napkin.
OmniGraffle is the tool to help you organize your thoughts visually, document them beautifully, and communicate them to the world. More than just a silly name, OmniGraffle is a powerful, yet easy to use diagramming and drawing tool.
OmniGraffle can help you make amazing graphic documents quickly by keeping lines connected to shapes even when they're moved, providing stencils full of common symbols for you to drag and drop, and magically organizing diagrams with just one click. Create flow charts, org charts, network diagrams, family trees, project processes, office layouts - or anything else that can be represented by symbols and lines.
Major Features:
- Outline view
- Diagram styles
- Stencil styles
- Bezier pen tool
- Corner radii on lines and shapes
- Three color gradient fills
- Double strokes
- Shadow casting on shapes
- Vector Pict support
- Dynamic text markup items
- Automatic document backup
- Smart guides
- Automatic layout
- Connector magnets
- Connecting shapes
- Bezier lines
- Rich image support
- Export to TIFF, JPEG, PNG, EPS, PDF, and HTML.
- Link objects to web addresses, AppleScripts, or files
- Common object stencils
- Shape and style cloning
- Built for Mac OS X
- Innovative inspectors
- Partially transparent ink
- Import OmniOutliner, Project Builder,
- EOModel, Diagram!2, and DOT files
- Multiple canvas documents
- Link within canvases
- Export as multipage HTML document with links between canvases
- Visio Binary & XML import
- Visio XML export
- Subgraphs
- Presentation mode
- Workplace save and restore
- Save drawing styles as favorites to be used over and over
- ColorSync support
- Mouseless editing
- Multiple editing windows on one document
- Manual guides
- SVG export
- Object notes & custom data
- Boolean operations on shapes
- Tables
- Advanced text position settings
- Improved PDF import
- Ruler scale
- Shared layers
- Show Applescript UIDs on Objects
Clean-Install Assistant 1.5.3
Clean-Install Assistant makes updating your System Folder to a new version of Mac OS a matter of minutes more>>
- And its much easier too, since it handles the migration of all your personal items and third-party extensions, printer drivers, special folders, etc.
- Now you can enjoy the stability of a Clean-Installed System Folder without the hassle of re-installing your essential additions.
Upgrading a System Folder to a new version of Mac OS often takes a lot of time, because you need to figure out which files to move to the new system and which ones to leave behind (extensions, control panels, printer drivers, application-specific items, special folders, etc ).
Clean-Install Assistant makes this process easier and faster because it does the sorting and moving automatically (using its list of factory-issue Mac OS files). Itll carefully collect your additions and move them to a separate folder while you update the System Folder, then move them back to the right places inside the new one with a single click!
Clean-Install Assistant also allows the following uses:
- Save space and backup your valuable additions and preference files only, instead of the whole System Folder!
- Install the same set of additions on multiple Macs: just copy the System Folder Additions folder to each Mac and click Add Back.
- Remove extra files and folders from your System Folder to restore it to a previous state: you can take a snapshot of the System Folder and have Clean-Install Assistant extract any items added since.
Clean-Install Assistant is free for personal and educational use. Business pricing is as follows:
- Businesses with 3 Macs or less: Free
- Consultants and businesses with 4 to 10 Macs: $50
- Site License (all Macs within a 100 miles radius of your site): $500
- World-Wide License (all locations for your organization): $1000
Enhancements:
- Version 1.5.3 is a maintenance release adding support for Mac OS 9.2.2.
- It allows transfering items to/from Mac OS 9.2.2, as well as previous versions of Mac OS.
Arcs and Sectors 1.0
Arcs and Sectors is known as a free yet very useful program taken from a CD-ROM collection of over 200 mathematics puzzles, available on the developers Web site. more>>
Arcs and Sectors 1.0 is known as a free yet very useful program taken from a CD-ROM collection of over 200 mathematics puzzles, available on the developer's Web site. Developed by a veteran teacher, these visually-oriented puzzle games have a simple interface and are designed to provide math problems in context to middle-school (grades five through nine) students.
In this particular program, students are given the radius or diameter of a circle, as well as the measure of a central angle, and must find the area of the circle, the area of the sector defined by the central angle, the circumference of the circle, and the length of the arc defined by the central angle. All answers are rounded to the nearest hundredth. You can view a screenshot of this program by clicking here.
