Free linksys wireless network usb adapter software for mac

ClassicStumbler is a wireless AirPort network utility that allows you to: At-a-glance network condition cues Optional automatic data refresh Detailed network information Toggle merging of unique base station SSIDsJoin networks from within the applicationText-only mode for increased speed and utility

Apple Bluetooth Firmware Updater 2.0 offers users a brilliant software which helps update the Apple internal Bluetooth firmware. Apple Bluetooth Firmware Updater provides improvements in the update installation process, better performance when waking the computer from sleep, and support for additional key commands during startup.

Major Features:

MacStumbler is a utility to display information about nearby 802.11b and 802.11g wireless access points. It is mainly designed to be a tool to help find access points while traveling, or to diagnose wireless network problems.
Additionally, MacStumbler can be used for "wardriving", which involves co-ordinating with a GPS unit while traveling around to help produce a map of all access points in a given area.
MacStumbler emulates the functionality of projects like netstumbler, bsd-airtools, and kismet.
Its meant purely for educational or auditing purposes, although many people enjoy using these types of programs to check out how many WiFi (wireless) networks are in their area, usually known as "war driving".
MacStumbler only works with AirPort wireless cards, it does not (yet) work with any PCMCIA or USB wireless devices.
To enhance the scanning results, many wardrivers like to use external antennas to increase the range. The new iBooks and Titanium PowerBooks both contain an antenna built into the screen (which can provide much better range than standard PCMCIA cards by themselves). This built-in antenna is directional, I find my iBook gets the best signal when the screen is facing away from the access point.
Enhancements:
Fixed bugs:
- "Unexepectedly quit" error at startup
- Window correctly remembers position
- Toolbar remembers configuration

Sleep USB is designed for use with PC card-based USB adapters for PowerBooks. Current USB card driver software (v1.2) has a bug causing the system to freeze when waking up from sleep if the USB card is installed.

This script will attempt to quit out of any applications running from non-startup drives, eject these drives, and then eject the USB card before putting the system to sleep.

Looking for a way to send SMS for free? 10-4 Good Buddy. Roger That allows you to send SMS messages to phones on the Rogers Wireless network right from the Dashboard. Simply type in the message and enter in the provided Rogers Wireless access code.
NOTE: Roger That will only send messages to Rogers Wireless subscribers - all other messages are discarded by their SMS servers.
Enhancements:
- Incorrect version number big fixed.
- Mobile number import from Address Book single name bug fixed
- Compiled as Universal Binery.

NetGrowler displays pop-up notifications on network events (joining new wireless networks, IP address changes, etc.) through Growl.
System requirements:
? - Growl 0.6.1 or later.
Enhancements
? - Fixed error encountered by Augie Fackler : Masks other than /16 were not calculated correctly. In particular, 10.x.y.z, for x.y != 0.0, was not considered as being within the RFC1918 address range 10.0.0.0/8.
? - Eliminated some warnings when compiling under Tiger.

Although USB to Ethernet adaptors are cheap and plentiful, Mac OS X drivers are not.
USB-to-Ethernet offers you USB to Ethernet Adaptor Drivers.
There are two basic catagories of USB-To-Ethernet adaptors:
- USB 1.1 devices that use a Pegasus driver.
- USB 2.0 devices that use a AX8817x driver (or its successor, the AX88772).
Each disk image includes an installer for Panther or Tiger, and a "src" folder containing the corresponding xCode projects.
Installation
Download and mount the appropriate driver disk image listed above, run the corresponding installer for Panther or Tiger, and then restart your system as suggested. The Installer will ask you to authenticate so it can place the corresponding driver in "/System/Library/Extensions/" with the correct file permisions to load as a kernel extension.
Next, plug-in your Ethernet adaptor with a live Ethernet cable attached. When you open the Network Preferences panel, it should inform you that a new port has appeared and ask if you want to enable it. Enable the new port and apply your network settings. Thats it.
Each driver is pre-configured to recognize a handfull of common devices. If your device does not appear to be recognized by the driver, you might have to add it to the Info.plist file, which is located inside the USBPegasusEthernet.kext or USBAx8817x.kext directory. You can use the System Profiler or USBProber tool to find the corresponding Product ID and Vendor ID.
To uninstall the driver, make sure any USB adaptors are disconnected, and then drag the corresponding driver in /System/Library/Extensions/ USBPegaususEthernet.kext or USBAx8817x.kext to the trash. You may need to authenticate that you have administrator privileges.
USB 1.1 Performance
The Pegasus chipset provides a USB 1.1 compatible implementation which could be a concern for some users. USB 1.1 runs at 1.5 Mbps (low speed) or 12 Mbps (full speed). For best performance, its important to isolate any low speed devices on a separate bus. Mice and keyboards often run at low speed.
Using the Link Rate tool in IPNetMonitorX, I measured the link rate to another device on my LAN as 6 Mbps. The built-in Ethernet on my 12" PBG4 reported 44 Mpbs. When I measured the link rate to the next hop router through my cable modem, it reported 1 mbps. It didnt make any difference whether I used Ethernet built-in or the USB-To-Ethernet adaptor. Finally, I downloaded a 2.2 MB file to compare the throughput using the Monitor tool.
Both downloads took 5 seconds, but Ethernet built-in reached a peak rate of 589 KBps versus 579 kBps. Repeating the experiment several times produced similar results. Ethernet built-in might be 1-2% faster, but performance was clearly limited by the speed of my cable modem (Your Mileage May Vary).
USB 2.0 Performance
The AX8817x chip set provides a USB 2.0 compatible implementation which runs at up to 480 Mbps (high speed), so it should be possible to keep up with 100 Mbps fast ethernet as long as there are no other slower devices on the same bus. To test this I copied a 64.8 MB music file to my PBG4 laptop connected through a LinkSys USB200M Ethernet Adaptor (en3) and compared this to the same file transfer using Built-in Ethernet (en0).
Both transfers reached 10 MBps (80-90 Mbps) and took about 10 seconds. I repeated the test in the other direction.
While the USB-To-Ethernet adaptor was slightly slower, at 80 Mbps there was little noticeable difference. Files moved quickly from one system to another via 100 Mbps fast Ethernet. Copying the same file using AirPort wireless took 50-90 seconds.
Stability
While other USB-To-Ethernet drivers are reported to be buggy, I havent encountered any stability problems to date. The adaptor turns off when the computer goes to sleep and comes back on when the computer awakes. It does not support "Wake On LAN" at this time.
Wrap Up
This USB-To-Ethernet Adaptor combination could be an attractive solution for a Mac Mini, or old iBook used as an Internet gateway or server. Im particularly fond of using old laptops as servers since they are compact, quiet, use little energy, and include their own battery backup.