Free packet loss software for mac

RUMpacket is a simple program for Packet Radio for European TNCs. I
t works with TNCs with "The Firmware" (TF) installed, using the Host Mode.
An autorouter is integrated, but there is no support for read or write files yet.
Enhancements:
- An other Bug fixed (Program did not response anymore)
- To do: Spy function works not satisfied.

Cocoa Packet Analyzer 0.65 is developed to be a useful native Mac OS X implementation of a network protocol analyzer and packet sniffer, which supports the industry-standard PCAP packet capture format for reading, capturing and writing packet trace files.

Major Features:

1. Basic packet capturing (libPCAP/ tcpdump filter expressions can be used).
2. Analyze and display packet trace files.
3. Supports PCAP packet capture format.
4. Quicklook plugin included - its basic but at least you can get an overview over packet trace files in finder.

Supported Types and Protocols:

• Ethertype ARP
• Ethertype IP (v4/ v6)
• Ethertype PPP
• Ethertype PPPoED/S
• Ethertype 802.1Q VLAN
• Linktype Loopback
• Linktype PPP
• IP-Protocol IP
• IP-Protocol TCP
• IP-Protocol UDP
• IP-Protocol ICMP
• IP-Protocol IGMP
• IP-Protocol L2TP
• PPPoE Discovery and Sessionstages
• PPP-Protocols: IP, LCP, IPCP, CCP, PAP, CHAP
• L2TP-Protocol (port based detection)
• RADIUS-Protocol (port based detection)
• SIP-Protocol (third party analyzer plugin)

Requirements: Mac OS X 10.4 or later.

HazIce 0.2 is a Hweb browser which has limited functions. Although this might not sound so appealing, it's speed can make up for the loss of features. It is in no way comparable to Safari, though if you want to load something fast, here's your answer.

HazIce uses the Safari WebKit available off of ADC.

Requirements: Mac OS X 10.3 or later.

Requirements:
Mac OS X 10.1 or later.

Enhancements:
Vesrion 2.6 adds the following:

• End of the line for darkstat 2
• (Jean-Edouard Babin) DLT_PPP_SERIAL linktype
• Print warnings from pcap_open_live()
• Considerable source code clean-up
• Updated to gettext 0.11.5, autoconf 2.57, automake 1.7
• Using ACX_PTHREAD macro in configure script
• (Daniel Lublin) WWW: Added title="..." to graph bars
• po: updated nl, added sk, added sr

With the new functionality of the plug-in interface, the EyeTV software gives third parties access to the raw incoming MPEG-2 transport stream packet data. At this time the API is available for the following products:
- EyeTV 200 (analog)
- EyeTV 300/310 (DVB-S)
- EyeTV 400/410 (DVB-T)
- EyeTV 500 (ATSC)

The plug-in receives plugged and unplugged notifications. It can request or release individual PIDs within the MPEG-2 transport stream, and most importantly, it has access to transport stream packets in real time, as they arrive from the device.

EyeTV plugin SDK is called before EyeTV looks at the packets, so it is even possible to modify the data.

The SDK includes a plug-in sample Xcode project as an easy way to demonstrate EyeTV plug-in functionality. This plug-in displays information about the captured MPEG-2 transport stream.