Free multimedia audio controller driver software for mac

Xbox 360 Controller driver adds support to Mac OS X for the official Microsoft Xbox 360 wired controller. Along with all the buttons, both analog sticks, the analog triggers and the D-pad, it implements Force Feedback support using the rumble motors as well.
As the driver is open source, it is also possible to see an example of how to communicate with the driver directly, to control the LEDs as well as bypass the Force Feedback functionality for direct rumble motor control.
Third party controllers should also be supported, but these must be added manually to the drivers list of supported devices. Currently this includes the official controller and the DOA4 stick controller.
Enhancements:
- Further new vendor/product IDs added.

Direction Controller is a REALbasic control that provides a direction selector control like the one seen in iMovie for selecting the text transition direction.

Requirements:
Mac OS X 10.1.5 or later, USB port.

USB Audio ASIO Driver allows you to use a laptop as a synthesizer or digital effect-box.

It enables buffersizes down to 32 samples (0.73 ms) and does an ultra highspeed USB audio connection, bypassing the operating systems audio.

This does not only give you low latencies but better sound quality also.

Nokia Multimedia Transfer 1.4.1 is a powerful application enables you to transfer pictures, videos, podcasts, music, and files between your Nokia mobile device and your Mac.

Enhancements:

• New user interface for settings
• Folder/playlist selector for music/video transfers from iTunes
• Folder/album selector for photo/video transfers from iPhoto
• Performance improvements and bug fixes

Requirements:

• For NMT 1.4.1 Mac OS X 10.5.5 or higher
• For NMT 1.3 Mac OS X 10.4.11 or higher
• iTunes 8 and iPhoto 6 or higher
• A compatible Nokia device. Please check the compatibility list.

USB Audio driver, connects USB Audio interfaces to pro audio applications.
This version supports Alesis USB mixing desks, ART USB, Audiotrak EX / EX5 / Maya 5.1 USB (48kHz only), Audiotrak EX7 / Maya 7.1 USB, Audiotrak OPTOPlay, Creative Extigy (48kHz only), Creative MP3+ (48kHz only), Creative SoundBlaster Live 24bit external, Digidesign Mbox, Elektor USB audio, Event EZBus, Edirol UA-1A (44.1kHz only), Edirol UA1-X, Edirol UA-3(D), Griffin iMic, Griffin PowerWave, HHB Portadisc, Hercules MusePocket (48kHz only), I-O Data D2VOX, Lexicon Omega, M-Audio Audiophile USB, Opcode DAT-/SonicPort (optical), Onkyo MSE-U33(HB), Onkyo SE-U55(X(S)), Philips Aurilium (48kHz only), Roland-ED UA-30, Sitecoms 5.1 Audio Adapter (48kHz only), SKNET Digital Sound Station, Terratec Aureon 5.1 USB (48 kHz only), Vivanco 5.1 Audio Converter (48kHz only) and Waveidea UASC-1.
Enhancements:
- Universal Binary.

M-Audio FireWire 1814 contains drivers and applications that enable the use of the M-Audio FireWire 1814 on Mac OS X.
Enhancements:
- Fixed a problem with Logic 7.2.3 with Project Mix where if the "Window" button is pressed Logic goes into a window opening loop and you have to close Logic.
- Fixed a problem with the Project Mix I/O MIDI Application where upgrading the firmware on the PMIO did not work with driver 1.7.1.
- Fixed a problem for random reports where Project Mix I/O reported unable to communicate with HUI.
- Fixed a problem on the Project Mix I/O where the letter e occasionally appears in the lower right of the LCD.
- Fixed a problem with the ProFire Lightbridge where signal returned via ADAT is approximately 150 samples before source signal.
- Fixed a problem where the NRV-10 does not always wake up correctly when coming out of sleep mode.
- Fixed a problem where the NRV-10 was reported that the unit must be power cycled after restart/startup for I/O to function.
- Fixed an intermittent problem with Mac Pro using the FW 1.7.4 driver would trigger a reboot loop after install of driver, and user connects any 1394 device.

M-Audio Delta 1010/1010LT/410/44/66 contains drivers for this particular MIDI hardware solution.