Free macbook unboxing software for mac

MacBook Pro ColorFix 0.5 is a very flexible and effective utility which fixes a bug which started in OS X 10.5 and persists with Snow Leopard 10.6.

Users are reporting that with multiple monitors attached to the MacBook Pro (an potentially other Macs) the local display profile changes from it's correct setting when woken from sleep, resulting in a washed-out blue-ish look on one or both monitors. Simply opening the 'displays' preferences panel results in the color profile automatically correcting itself back to the correct profiles. This can be a pain, so this AppleScript Application simply does the above automatically. Place it in your dock and click it whenever you encounter this situation. Hopefully this will be addressed by Apple before this application comes out of beta testing.

The SMC Firmware Update 1.0 is a System Management Control (SMC) firmware update for certain Intel-based computers, including MacBook Pro (15-inch) computers. Tip: Print or write down these instructions before you begin installing the update.

There are two parts to this process: Installing the firmware update application, and using the firmware update application to install the SMC Firmware Update.

1. Download the SMC Firmware Update 1.0, which is available at Apple Downloads.
2. Quit open applications, which are marked in the Dock with a small triangle.
3. Double click the SMC Update.pkg file.
4. Click Continue after reading the licensing agreement, then click Agree if you accept the terms.
5. Click Install to install the update application.
6. After the software is successfully installed, click Close to start the updater application. (If you inadvertently skipped this part, you can find the updater in /Applications/Utilities.)
7. Read the onscreen firmware update installation instructions, then click Restart to proceed.
As your computer starts, the SMC will be updated. Your computers fans will run at full speed during the update but will return to normal once the update completes. The computer will restart again once the firmware update is complete. Important: Do not interrupt the update process.

After your computer restarts a second time, you should see a message stating that the update was successful. Click OK to continue.

Note: If you see the dialog that you saw in step 7 instead of a message that the update was successful, try installing the update again (use the updater in /Applications/Utilities/).

Important: Do not interrupt the update.

MacBook Pro Software Update provides important bug fixes and is recommended for all 2.2/2.4GHz MacBook Pro models.

MacBook Pro is built on the revolutionary Intel Core 2 Duo — which packs the power of two processor cores (up to 2.4GHz) inside a single chip. It provides 4MB of Smart Cache, L2 cache that can be shared between the cores as needed. It delivers higher performance in 2D and 3D graphics, video editing, and music encoding. But the faster engine is only part of the story.

MacBook Pro will deliver up to 4GB of 667MHz DDR2 memory with a faster, 800MHz frontside bus and support for hard drives up to 250GB. Ultimate speed, performance, and connectivity. To go. That’s MacBook Pro.

Note: This update replaces MacBook Pro Software Update 1.0.

The SMC Firmware Update is a System Management Control (SMC) firmware update for certain Intel-based computers, including MacBook Pro (15-inch) computers. Tip: Print or write down these instructions before you begin installing the update.
There are two parts to this process: Installing the firmware update application, and using the firmware update application to install the SMC Firmware Update.
- Download the SMC Firmware Update, which is available at Apple Downloads.
- Quit open applications, which are marked in the Dock with a small triangle.
- Double click the SMC Update.pkg file.
- Click Continue after reading the licensing agreement, then click Agree if you accept the terms.
- Click Install to install the update application.
- After the software is successfully installed, click Close to start the updater application. (If you inadvertently skipped this part, you can find the updater in /Applications/Utilities.)
- Read the onscreen firmware update installation instructions, then click Restart to proceed.
As your computer starts, the SMC will be updated. Your computers fans will run at full speed during the update but will return to normal once the update completes. The computer will restart again once the firmware update is complete. Important: Do not interrupt the update process.
When your computer restarts a second time, you should see a message stating that the update was successful. Click OK to continue.
Note: If you see the dialog that you saw in step 7 instead of a message that the update was successful, try installing the update again (use the updater in /Applications/Utilities/).
Important: Do not interrupt the update.

System requirements:
- MacBook Pro 15-inch

Enhancements
- Adjusts the fan behavior in MacBook Pro systems when running under high workload conditions.

The SMC Firmware Update adjusts fan behavior in the MacBook.

After this update has completed successfully, your SMC Version will be: 1.4f10.

The updater application will be installed in the /Applications/Utilities folder. Please follow the instructions in the updater application to complete the update process.

Here are the instructions within the updater:

To update the SMC firmware on your MacBook:
Your computers power cord must be connected and plugged into a working power source.
1. Quit all other open applications.
2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.

The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.

Important: Do not interrupt the update.

Your computer restarts automatically when the update is completed and opens the MacBook SMC Firmware Update.

3. Click OK. The SMC firmware is now up-to-date.

If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.

This update is for MacBook Pro computers with Intel processors only.
It now runs on localized systems that use languages that read right to left.

Note: Print or write down these instructions before you begin the update.

To update the firmware on your Intel-based MacBook Pro:

1. Quit all other open applications.

2. Click Shut Down in the MacBook Pro Firmware Updater window and wait for your computer to shut down.

3. Press and hold the power button on your MacBook Pro until the power indicator light flashes repeatedly to begin the update.

A status bar indicates the progress of the update.

Important: Do not interrupt the update.

Your computer restarts automatically when the update is completed and opens the MacBook Pro Firmware Updater.

4. Click OK, if the firmware is now up-to-date.

If these instructions appear on your screen again, the firmware update was not successful. Repeat steps 2, 3 and 4.

For more information, please visit this website:http://www.info.apple.com/kbnum/n303364