macbook pro unboxing
MacBook Pro ColorFix 0.5
MacBook Pro ColorFix is a very flexible and effective utility which fixes a bug which started in OS X 10.5 and persists with Snow Leopard 10.6. more>>
MacBook Pro ColorFix 0.5 is a very flexible and effective utility which fixes a bug which started in OS X 10.5 and persists with Snow Leopard 10.6.
Users are reporting that with multiple monitors attached to the MacBook Pro (an potentially other Macs) the local display profile changes from it's correct setting when woken from sleep, resulting in a washed-out blue-ish look on one or both monitors. Simply opening the 'displays' preferences panel results in the color profile automatically correcting itself back to the correct profiles. This can be a pain, so this AppleScript Application simply does the above automatically. Place it in your dock and click it whenever you encounter this situation. Hopefully this will be addressed by Apple before this application comes out of beta testing.
MacBook Pro Software Update 1.1
MacBook Pro Software Update provides important bug fixes and is recommended for all 2.2/2.4GHz MacBook Pro models more>>
MacBook Pro is built on the revolutionary Intel Core 2 Duo which packs the power of two processor cores (up to 2.4GHz) inside a single chip. It provides 4MB of Smart Cache, L2 cache that can be shared between the cores as needed. It delivers higher performance in 2D and 3D graphics, video editing, and music encoding. But the faster engine is only part of the story.
MacBook Pro will deliver up to 4GB of 667MHz DDR2 memory with a faster, 800MHz frontside bus and support for hard drives up to 250GB. Ultimate speed, performance, and connectivity. To go. Thats MacBook Pro.
Note: This update replaces MacBook Pro Software Update 1.0.
Apple MacBook Pro SMC Firmware 1.0
Apple MacBook Pro SMC Firmware - SMC firmware update for MacBook Pro (15-inch) more>>
There are two parts to this process: Installing the firmware update application, and using the firmware update application to install the SMC Firmware Update.
1. Download the SMC Firmware Update 1.0, which is available at Apple Downloads.
2. Quit open applications, which are marked in the Dock with a small triangle.
3. Double click the SMC Update.pkg file.
4. Click Continue after reading the licensing agreement, then click Agree if you accept the terms.
5. Click Install to install the update application.
6. After the software is successfully installed, click Close to start the updater application. (If you inadvertently skipped this part, you can find the updater in /Applications/Utilities.)
7. Read the onscreen firmware update installation instructions, then click Restart to proceed.
As your computer starts, the SMC will be updated. Your computers fans will run at full speed during the update but will return to normal once the update completes. The computer will restart again once the firmware update is complete. Important: Do not interrupt the update process.
After your computer restarts a second time, you should see a message stating that the update was successful. Click OK to continue.
Note: If you see the dialog that you saw in step 7 instead of a message that the update was successful, try installing the update again (use the updater in /Applications/Utilities/).
Important: Do not interrupt the update.
MacBook Wallpapers & Icons 1.0
The whole new extra-smooth made MacBook icons and wallpapers. more>> <<less
MacBook Family Icons 1.3
MacBook Family Icons - 8 MacBook icons more>>
Download MacBook Family Icons now and enjoy!
Note: We only used Apples (public) media material.
, including MacBook Pro, MacBook White, MacBook Black, and MacBook Bono Version (for this guys ... Download MacBook Family Icons now and enjoy! Note: We only used Apples (public) mediaApple MacBook Pro 17-inch SMC Firmware 1.3
Firmware update for your MacBook Pro. more>> Firmware update for your MacBook Pro.
This SMC Firmware Update adjusts fan behavior in the MacBook Pro 17-inch. The updater application will be installed in the /Applications/Utilities folder and will launch automatically after restart. Please follow the instructions in the updater application to complete the update process.
Here are the instructions within the updater, as they appear for the MacBook Pro Updater:
To update the SMC firmware on your MacBook Pro:
- Quit all other open applications.
- Click Restart in the MacBook Pro SMC Firmware Update window and wait for your computer to restart.
The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
It is very important not to interrupt the update.
Your computer restarts automatically when the update is completed and opens the MacBook Pro SMC Firmware Update.
- Click OK. The SMC firmware is now up-to-date.
If these instructions appear on your screen again, the SMC firmware update was not successful.
System requirements:
- 17" MacBook Pro.
Enhancements
- Adjusts the fan behavior in MacBook Pro systems when running under high workload conditions.
MacBook Pro SMC Firmware Update window and wait for your computer to restart. The SMC firmware ... Your computer restarts automatically when the update is completed and opens the MacBook ProApple MacBook Pro 15-inch SMC Firmware 1.3
SMC firmware update for MacBook Pro. more>> SMC firmware update for MacBook Pro.
The SMC Firmware Update is a System Management Control (SMC) firmware update for certain Intel-based computers, including MacBook Pro (15-inch) computers. Tip: Print or write down these instructions before you begin installing the update.
There are two parts to this process: Installing the firmware update application, and using the firmware update application to install the SMC Firmware Update.
- Download the SMC Firmware Update, which is available at Apple Downloads.
- Quit open applications, which are marked in the Dock with a small triangle.
- Double click the SMC Update.pkg file.
- Click Continue after reading the licensing agreement, then click Agree if you accept the terms.
- Click Install to install the update application.
- After the software is successfully installed, click Close to start the updater application. (If you inadvertently skipped this part, you can find the updater in /Applications/Utilities.)
- Read the onscreen firmware update installation instructions, then click Restart to proceed.
As your computer starts, the SMC will be updated. Your computers fans will run at full speed during the update but will return to normal once the update completes. The computer will restart again once the firmware update is complete. Important: Do not interrupt the update process.
When your computer restarts a second time, you should see a message stating that the update was successful. Click OK to continue.
Note: If you see the dialog that you saw in step 7 instead of a message that the update was successful, try installing the update again (use the updater in /Applications/Utilities/).
Important: Do not interrupt the update.
System requirements:
- MacBook Pro 15-inch
Enhancements
- Adjusts the fan behavior in MacBook Pro systems when running under high workload conditions.
Apple MacBook, MacBook Pro Keyboard Firmware 1.0
Apple MacBook, MacBook Pro Keyboard Firmware brings you a useful update that addresses an issue where the first key press may be ignored if the computer has been sitting idle. more>> <<less
MacBook Pro 17 SMC Firmware Updater 1.0
MacBook Pro 17 SMC Firmware Updater is an application to control fan behavior in the MacBook Pro 17-inch. more>>
Requirements:
- Mac OS X 10.4.7 or later
- 17-inch MacBook Pro.
Apple MacBook Pro (Intel) Firmware Update 1.0.1
Apple MacBook Pro (Intel) Firmware Update - For MacBook Pro computers with Intel processors more>>
It now runs on localized systems that use languages that read right to left.
Note: Print or write down these instructions before you begin the update.
To update the firmware on your Intel-based MacBook Pro:
1. Quit all other open applications.
2. Click Shut Down in the MacBook Pro Firmware Updater window and wait for your computer to shut down.
3. Press and hold the power button on your MacBook Pro until the power indicator light flashes repeatedly to begin the update.
A status bar indicates the progress of the update.
Important: Do not interrupt the update.
Your computer restarts automatically when the update is completed and opens the MacBook Pro Firmware Updater.
4. Click OK, if the firmware is now up-to-date.
If these instructions appear on your screen again, the firmware update was not successful. Repeat steps 2, 3 and 4.
For more information, please visit this website:http://www.info.apple.com/kbnum/n303364
Apple MacBook Pro (Intel) Firmware Update - For ... 2. Click Shut Down in the MacBook Pro Firmware Updater window and wait for your computer to shutApple MacBook/Pro Keyboard Firmware Update 1.0
Apple MacBook/Pro Keyboard Firmware Update is designed to address an issue where the first key press may be ignored more>>
Apple MacBook/Pro Keyboard Firmware Update 1.0 is designed to address an issue where the first key press may be ignored if the computer has been sitting idle. It also addresses some other issues.
This update installs an application in the Utilities folder called "Built-in Keyboard Firmware Update." The updater application will automatically open. Once open, please follow the instructions within the application to complete the update. It can also be manually run later by double-clicking the updater in the Utilities folder.
The MacBook and MacBook Pro Keyboard Firmware Update 1.0 supports the following products:
- MacBook (Late 2006)
- MacBook (Mid 2007)
- MacBook (Late 2007)
- MacBook Pro (17-inch Core 2 Duo)
- MacBook Pro (15-inch Core 2 Duo)
- MacBook Pro (Mid 2007, 2.4/2.2GHz)
- MacBook Pro (Late 2007, 2.4/2.2GHz)
Requirements: Mac OS X 10.5.2.
<<lessApple MacBook Air SMC Update 1.2
Apple MacBook Air SMC Update offers users a useful update which adds compatibility for the latest service replacement batteries. more>>
Apple MacBook Air SMC Update 1.2 offers users a useful update which adds compatibility for the latest service replacement batteries.
SMC Firmware Updates refer to the System Management Controller (SMC) firmware update for Intel-based computers. The SMC is a micro-controller on the logic board that controls the power functions for your computer. The SMC controls various functions, including:
Power and thermal management, the Sleep LED, and battery.
Controlling the fans, supporting Sudden Motion Sensor, ALS, and the power switch.
To complete the firmware update process, please follow the instructions in the updater application (/Application/Utilities/MacBook Air SMC Firmware Update.app). The updater will launch automatically when the installer closes.
Boot ROM or SMC Version Information:
- After this update has successfully completed, your SMC Version will be: 1.23f20
- After this update has successfully completed, your SMC Version will be: 1.34f8
Apple MacBook/Pro Software Update 1.2
Apple MacBook/Pro Software Update brings a useful update to your Apple MacBook Pro which improves graphics stability. more>>
Apple MacBook/Pro Software Update 1.2 brings a useful update to your Apple MacBook Pro which improves graphics stability. It is recommended for all MacBook Pro (Mid 2007, 2.4/2.2GHz) computers running Mac OS 10.4 Tiger.
Requirements: Mac OS X 10.4
