Free linksys wireless g broadband router software for mac

Linksys WRT54GS v2 router Firmware updater.
Instructions :
Before you start, be sure you are using a PC that is connected to the WRT54GS via a wired (Ethernet) connection.
2) Open your web browser (e.g., Internet Explorer, Netscape, etc.)
3) In the Address bar, type in the IP address of your router. The default IP address is 192.168.1.1.
4) Leave the username blank and enter your password. The default password is "admin", all lower case.
5) Click on the Administration tab.
6) Click on Firmware Upgrade.
7) Browse for the firmware file that you have just extracted. The file name should end in .rmt
8) Click the Upgrade button.
9) The router will begin its upgrade routine. Do not power off or unplug the router until the process is completed. This process may take up to 5 minutes to complete.
Enhancements:
- Resolves issue with setup wizard
- Updated wireless security tab
- Resolves issue with port based QoS.

The Broadband Tuner allows you to take full advantage of very high speed Internet connections that have a high latency (5 Mbps or faster). The installer tweaks some system parameters.

There is an optional uninstaller that can be used to restore the settings that were in effect at the time just before the system parameters were changed.

The installer increases the default values for the size of the TCP send and receive buffers. With larger buffers more data can be in transit at once. A startup configuration file is also updated so that these changes will persist across restarts.

The system parameters are sysctl variables that are set as follows:

net.inet.tcp.sendspace: 131072
net.inet.tcp.recvspace: 358400
kern.ipc.maxsockbuf: 512000

This change has a system wide effect and is applied even if the network is not high speed connection with a high latency, with the exception of modem connections for which the system uses small default TCP buffer sizes.

This download supports: English.

Wireless Grapher 0.6 is a useful software that helps you display the wireless network you are connected to, the channel, and also graphs the connection's RSSI (Recieved signal strength indication) and Noise. A Dashboard widget that graphs the wireless connection of your Airport or Airport Extreme card. Features the ability to update in the background and to control how quick samples are taken. Samples the noise and RSSI of the connection.

Requirements:
Linksys Etherfast Wireless 4-port switch (model number BEFW11S4).

Enhancements:
Version 1.45.3 fixes the following:

• Fixed unstable HTTP and FTP download
• Fixed MSN 4.7 and 5.0 compatibility
• Updated for XBox compatibility (This is not XBox Certified)
• Fixed UPnP connection
• Fixed connection issues with certain wireless clients in power save mode
• Fixed Multiple Microsoft VPN connections
• Fixed an issue with PPPoE connection accessing secured sites as reported by ISPs

iStat wireless is a simple widget to monitor wireless network strength with a striking design and two different views.

Switching between the simple and advanced views is merely a matter of clicking on the dials centre.

iStat wireless is a tool available now for both PC and Mac Yahoo! Widget Engine users.
Note: Interface varies between platforms.

Wireless Key Generator 1.0 is a useful utility designed for generating wep security keys for wireless routers and access points.

To use launch Wireless Key Generator. Then simply select bit size and mode and click onto the Generate button. Once generated save the keys to a text file, burn to CD, and use the CD to copy one of the keys on each wireless computer.

Requirements:

• Mac OS X 10.1 - 10.4
• Windows 98/2000/XP/Vista