elecraft k3 firmware
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 271
Apple 2/3/4/6GB Firmware 1.0
This utility is used to update the firmware on 2, 3, 4, and 6 GB SCSI hard drives in some Power Macintosh configurations with firmware versions other than 0F0J more>> This utility is used to update the firmware on 2, 3, 4, and 6 GB SCSI hard drives in some Power Macintosh configurations with firmware versions other than 0F0J. This utility can be used on international versions of Mac OS as well as U.S. Mac OS versions. This bootable disk image contains a utility to fix a problem with a limited number of 2, 3, 4, and 6 GB SCSI hard drives in some Power Macintosh and Performa configurations that may experience a problem waking after the machines has been set to the Sleep mode.
Requirements:
DiskCopy 6.1 or later, Apple SCSI 2, 3, 4, or 6GB hard drive.
<<lessDiskCopy 6.1 or later, Apple SCSI 2, 3, 4, or 6GB hard drive.
Download (1.4MB)
Added: 1997-11-21 License: Updater Price:
downloads
Apple Cube Firmware 4.1.9
The G4 Cube Firmware Update 4.1.9 will only run on G4 Cube models with AGP graphics running Mac OS 9.1 from a local drive more>> The G4 Cube Firmware Update 4.1.9 will only run on G4 Cube models with AGP graphics running Mac OS 9.1 from a local drive. If you are using Mac OS X Server on your Cube, you must boot from a local Mac OS 9.1 writeable partition (not a CD, or network disk) prior to following the update instructions.
Firmware Update 4.1.9 includes improvements to starting up Mac OS X from the local hard disk, FireWire target disk mode, network startup, and system stability. This update also adds support for additional security options that allow the Open Firmware to be password-protected.
Users report being able to view RAM that became unrecognizable in the last firmware update.
Requirements:
G4 Cube, MacOS 9.1 or later.
<<lessG4 Cube, MacOS 9.1 or later.
Download (1.1MB)
Added: 2001-09-25 License: Updater Price:
downloads
Apple G3 Firmware Updater 1.1
Apple G3 Firmware 1.1 Updater improves PCI performance on all blue and white Power Macintosh G3 desktop systems. Do not install this on Macintosh Server G3 running Mac OS X Server more>> Apple G3 Firmware 1.1 Updater improves PCI performance on all blue and white Power Macintosh G3 desktop systems. Do not install this on Macintosh Server G3 running Mac OS X Server.
Note: G3 Firmware Update 1.1 installs the same firmware as G3 Firmware Update 1.0.2. If you downloaded G3 Firmware Update 1.0.2 and updated your firmware successfully, then it is not necessary to download G3 Firmware Update 1.1.
Requirements:
Power Macintosh G3 (blue model)
<<lessPower Macintosh G3 (blue model)
Download (871K)
Added: 1999-05-12 License: Updater Price:
downloads
Rio 600 Firmware 1.5.6
Rio 600 is a firmware update for the portable Rio 600 MP3 player. Requirements: Diamond Rio600, Rio600 USB Cable, RioPort SoundJam MP 2.1.1 more>> Rio 600 is a firmware update for the portable Rio 600 MP3 player.
Requirements:
Diamond Rio600, Rio600 USB Cable, RioPort SoundJam MP 2.1.1 Software.
<<lessDiamond Rio600, Rio600 USB Cable, RioPort SoundJam MP 2.1.1 Software.
Download (465K)
Added: 2001-05-19 License: Free Price:
downloads
Rio 800 Firmware 1.5.6
Rio 800 contains the firmware needed to connect your Rio 800 MP3 player to your Mac. Requirements: MacOS 8.6 or later, Diamond Rio 800 MP3 player more>> Rio 800 contains the firmware needed to connect your Rio 800 MP3 player to your Mac.
Requirements:
MacOS 8.6 or later, Diamond Rio 800 MP3 player.
MacOS 8.6 or later, Diamond Rio 800 MP3 player.
Enhancements:
Version 1.5.6 adds support for 128MB cards and resolves issues with audible playback.
<<lessVersion 1.5.6 adds support for 128MB cards and resolves issues with audible playback.
Download (476K)
Added: 2001-05-19 License: Free Price:
downloads
Apple DVD-ROM Firmware 1.1
Apple DVD-ROM Firmware is a beneficial and easy to use application which places new firmware on the Apple DVD-ROM drive installed in iMac DV+, iMac DV Special Edition, and Power Mac G4 Cube computers. more>>
Apple DVD-ROM Firmware 1.1 is a beneficial and easy to use application which places new firmware on the Apple DVD-ROM drive installed in iMac DV+, iMac DV Special Edition, and Power Mac G4 Cube computers. This update improves the audio extraction performance of your DVD-ROM drive.
Download (777.3KB)
Added: 2001-01-16 License: update/patch Price:
downloads
Other version of Apple DVD-ROM Firmware
The iMac/Cube DVD-ROM Updater places new firmware on the Apple DVD-ROM drive installed in iMac ...The iMac/Cube DVD-ROM Updater places new firmware on the Apple DVD-ROMLicense:Updater
TI-89 firmware 2.09
Calculator Software Applications (Apps) can be added to any TI-89 simply by ensuring that your TI-89 has at least v2.01 operating system more>>
TI-89 firmware 2.09 is developed to be a useful and handy software with which Calculator Software Applications (Apps) can be added provided that your TI-89 has at least v2.01 operating system. However, regardless of your TI-89 operating system version, we recommend replacing it with this latest FREE version to take advantage of the benefits listed above. Note: Installing the Advanced Mathematics Software from another TI-89 will take approximately 1/4 of the time required to install it from a computer.
Added: 2003-09-15 License: update/patch Price:
17 downloads
Apple G4 CD/RW Firmware 1.1
Apple G4 CD/RW Firmware improves the CD-RW drive responsiveness after waking up from sleep in Mac OS 9 or Mac OS X more>> Apple G4 CD/RW Firmware improves the CD-RW drive responsiveness after waking up from sleep in Mac OS 9 or Mac OS X.
Requirements:
PowerPC G4, MacOS 9.0 or later.
<<lessPowerPC G4, MacOS 9.0 or later.
Download (1.3MB)
Added: 2002-01-09 License: Updater Price:
downloads
Netopia Router Firmware 3.3
Netopia firmware version 3.3 will be of interest to all customers with routers of serial numbers greater than 6308101. If your serial number is earlier than 6308101, your latest firmware is 3.1.3 more>> Netopia firmware version 3.3 will be of interest to all customers with routers of serial numbers greater than 6308101. If your serial number is earlier than 6308101, your latest firmware is 3.1.3. Information about this Firmware updater can be found on Netopias website. All Netopia router models will benefit from this firmware upgrade.
Requirements:
Netopia Router
<<lessNetopia Router
Download (0K)
Added: 1998-07-18 License: Updater Price:
downloads
Castlewood ORB Firmware 2.2
Castlewood ORB Firmware is the latest release of the removable storage device called the ORB. Readers have reported no new problems after upgrading with this firmware more>> Castlewood ORB Firmware is the latest release of the removable storage device called the ORB. Readers have reported no new problems after upgrading with this firmware.
Requirements:
ORB removable storage drive, System 7.6.1 or later.
<<lessORB removable storage drive, System 7.6.1 or later.
Download (274K)
Added: 2000-03-13 License: Free Price:
downloads
Nomad Jukebox Firmware 2.96
Creative Jukebox Firmware (ver 2.86) for users running Macintosh Operating System 8.6 and above. With this update, you can now perform line-in recordings without any problems more>> Creative Jukebox Firmware (ver 2.86) for users running Macintosh Operating System 8.6 and above. With this update, you can now perform line-in recordings without any problems. Your recordings are also created as albums now, instead of a single file.
Requirements:
MacOS 8.6 or later, SoundJam 2.5.2 or iTunes.
MacOS 8.6 or later, SoundJam 2.5.2 or iTunes.
Enhancements:
Version 2.96 adds more language support, new batter icons, improved track shuffling, improved performance, and better track management.
<<lessVersion 2.96 adds more language support, new batter icons, improved track shuffling, improved performance, and better track management.
Download (871K)
Added: 2002-05-20 License: Updater Price:
downloads
Apple Ultra2 SCSI Card Firmware 1.2
If your (blue and white) Power Macintosh G3 or Macintosh Server G3 came with a single channel Ultra2 low voltage differential (LVD) SCSI card, run the 2940U2B v1.2 Flash Utility to install updated more>> If your (blue and white) Power Macintosh G3 or Macintosh Server G3 came with a single channel Ultra2 low voltage differential (LVD) SCSI card, run the "2940U2B v1.2 Flash Utility" to install updated firmware on the card to increase performance and reduce compatibility issues when using large files.
Requirements:
MacOS 8.6 or later, Ultra2 SCSI card in G3.
<<lessMacOS 8.6 or later, Ultra2 SCSI card in G3.
Download (299K)
Added: 1999-07-01 License: Updater Price:
downloads
Apple MacBook/Pro Trackpad Firmware 1.0
Apple MacBook/Pro Trackpad Firmware has come as a firmware update which resolves a problem that trackpad clicks may not be recognized on MacBook (Late 2008) and MacBook Pro (Late 2008) systems. more>>
Apple MacBook/Pro Trackpad Firmware 1.0 has come as a firmware update which resolves a problem that trackpad clicks may not be recognized on MacBook (Late 2008) and MacBook Pro (Late 2008) systems. The update package will install an updater application into the Applications/Utilities folder and will launch it automatically. Follow the instructions in the updater application to complete the update process.
Download (923.1KB)
Added: 2008-11-17 License: update/patch Price:
downloads
Apple MacBook SMC Firmware Update
Apple MacBook SMC Firmware Update - Adjusts MacBook fan behavior more>>
The SMC Firmware Update adjusts fan behavior in the MacBook.
After this update has completed successfully, your SMC Version will be: 1.4f10.
The updater application will be installed in the /Applications/Utilities folder. Please follow the instructions in the updater application to complete the update process.
Here are the instructions within the updater:
To update the SMC firmware on your MacBook:
Your computers power cord must be connected and plugged into a working power source.
1. Quit all other open applications.
2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.
The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
Important: Do not interrupt the update.
Your computer restarts automatically when the update is completed and opens the MacBook SMC Firmware Update.
3. Click OK. The SMC firmware is now up-to-date.
If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.
<<lessAfter this update has completed successfully, your SMC Version will be: 1.4f10.
The updater application will be installed in the /Applications/Utilities folder. Please follow the instructions in the updater application to complete the update process.
Here are the instructions within the updater:
To update the SMC firmware on your MacBook:
Your computers power cord must be connected and plugged into a working power source.
1. Quit all other open applications.
2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.
The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
Important: Do not interrupt the update.
Your computer restarts automatically when the update is completed and opens the MacBook SMC Firmware Update.
3. Click OK. The SMC firmware is now up-to-date.
If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.
Download (420KB)
Added: 2006-08-18 License: Freeware Price:
1169 downloads
CD Burner Yamaha CRW Firmware 1.0q
CD Burner Yamaha CRW400xx Firmware is a revised version of the standard for supporting 4x writing. It fixes the following problems: There are no problems with the following more>> CD Burner Yamaha CRW400xx Firmware is a revised version of the standard for supporting 4x writing. It fixes the following problems:
- There are no problems with the following.
- ISO9660 recorded in Disk-at-once mode.
- ISO9660 recorded in Track-at-once mode, with single session and the "Close Disc" setting
- Other formats such as CD-DA.
Requirements:
Yamaha CRW4260 or CRW400xx.
<<lessYamaha CRW4260 or CRW400xx.
Download (215K)
Added: 1998-11-30 License: Updater Price:
downloads
Other version of CD Burner Yamaha CRW Firmware
CD Burner Yamaha CRW Firmware is the CDR/RW drivers for the ...CD Burner Yamaha CRW Firmware is the CDR/RW drivers for the YamahaLicense:Free
CD Burner Yamaha CRW Firmware is a revised version of the standard . CD Burner Yamaha CRW Firmware is a revised version of the standardLicense:Updater
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above elecraft k3 firmware search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
