beta 6
vSide beta 6
Your place to party online. more>>
Your Place. Your Style. Your Friends. Vside is a rich virtual world where everyone can get an apartment to decorate and throw the best parties. Hang out with your friends and watch videos or go out clubbing in one of the three stunning neighborhoods, RaiJuku and La Genoa Aires or New Venezia.
CPUD 2.3 Beta 6
View and configure the cache and processor clock speed settings on your PowerLogix upgrade card more>> View and configure the cache and processor clock speed settings on your PowerLogix upgrade card
CPU Director allows you to view and configure the cache and processor clock speed settings on your PowerLogix upgrade card. The included utilities allow you to enable or disable the cache "on the fly", change the speed at which your backside cache operates and automatically enable the cache at this speed at boot time.
If your upgrade uses an IBM 750FX or 750GX processor, you can also change the processor clock speed "on the fly" as well as the speed at which to set the processor when rebooting. There are also options to disable speculative access (a problem with OldWorld machines that originally did not ship with a G3 or G4 processor) and enable dynamic power management.
Finally, if your upgrade uses multiple-processors, and you are running Mac OS X, you can view and change these settings on a per-processor basis.
Installation Instructions
To install CPU Director, simply drag the CPU Director folder onto your hard drive. It is recommended that you drag it into your /Applications/ folder, however you may place it anywhere you want on the drive.
You must drag the entire CPU Director folder to your hard drive, not just the application itself. Double-click the CPU Director application to launch it, and the software will automatically install its various components.
In order to install the software under Mac OS X, an administrator password is required, because a KEXT and Startup Item need to be installed. No reboot is required - you may proceed to use CPU Director immediately.
Initial Configuration
Once you have successfully installed CPU Director, you should configure your cache settings as appropriate for your upgrade card. To make changes under Mac OS X, you must click on the security lock icon in the upper right-hand corner of the window so that it becomes unlocked.
For security reasons, you will be prompted for an administrator password in order to change any settings. Under Mac OS 9, no special authentication is required.
Now, configure your upgrade card settings, essentially choosing an appropriate ratio, whether to enable/disable speculative access, whether to enable dynamic power management and, for 750FX/750GX upgrades, what PLL settings you wish to use.
Enhancements
- Added support for OS X 10.4.9
Libmsn 4.0 Beta 6
Free and open source library for accessing the MSN Messenger service Libmsn is a fully documented, reusable library that will help you connect to Microsofts MSN Messenger service more>> Free and open source library for accessing the MSN Messenger service
Libmsn is a fully documented, reusable library that will help you connect to Microsofts MSN Messenger service.
System requirements:
- CMake
ogre4j 1.6.2 beta 6
Project that enables the use of the OGRE libraries in Java applications more>> Project that enables the use of the OGRE libraries in Java applications
ogre4j is a project that enables the use of the OGRE (Object-Oriented Graphics Rendering Engine) libraries in Java applications.
System requirements:
-
Enhancements
- applied NedMalloc patch (2799873) to allow linking with stock OGRE 1.6.2
- added x86_64 specific code to native ResourcePtr.delete()
Civil Netizen beta 6
Civil Netizen - File transfer program for complete privacy more>>
No longer will you have to deal with the hassle of setting up FTP servers, shared drives, hosting accounts, large email attachments, or 3rd party websites.
Built on the Mozilla Firefox platform and secured with 128-bit AES encryption, Civil Netizen offers you the peace of mind that your personal content will securely arrive at your intended destination.
With Civil Netizen, the power to move your large digital parcels is in your hands!
Civil Engines - Civil Netizen. A simple menu bar item that displays an icon ofLicense:Freeware
GoogaLoom 1.0 Beta 6
A very efficient RapidWeaver plugin designed for the Google payment system. more>> <<less
OrangeHRM 2.5 Beta 6
Comprehensive Human Resource Management (HRM) System that captures all the essential functionalities required for any enterprise more>> <<less
NetNewsWire 3.2 beta 6
NetNewsWire has come as a simple and handy tool which works as a RSS and Atom news reader for Mac OS X more>>
NetNewsWire 3.2 beta 6 has come as a simple and handy tool which works as a RSS and Atom news reader for Mac OS X. Its familiar three-paned interface -- similar to Apple Mail and Outlook Express -- can fetch and display news from thousands of different websites and weblogs, making it quick and easy to keep up with the latest news.
CoverSutra 2.2 Beta 6
CoverSutra is a very effective program which gives you a handy and attractive way to control iTunes without having to leave your current application. more>> <<less
OmniOutliner 3.9 beta 6
OmniOutliner beta 6 is an amazingly flexible business application that lets you create collect, and organize information. more>>
OmniOutliner 3.9 beta 6 is an amazingly flexible business application that lets you create collect, and organize information. Give your creativity a kick start by using an application that's actually designed to help you think. It's like having an extra brain - one that doesn't keep losing the car keys.
You can use OmniOutliner's document structure to create hierarchies of main headings and subpoints that can be expanded and collapsed, which are immensely useful when it comes to brainstorming new ideas, drilling out specifics, and lining up steps needed to get everything done. But you aren't limited to outlines - you've got multiple columns, smart checkboxes, customizable popup lists, and an uber-innovative styles system at your disposal.
Use OmniOutliner to draft to-do lists, create agendas, manage tasks, track expenses, take notes, plan events, write screenplays and just about anything else you can think of. It's a smarter way to write, a more productive way to stay organized. Whatever your project, OmniOutliner has the tools you need to get the job done.
OmniOutliner Pro beta 6 brings you an amazingly flexible business program that lets you create, collect, and organizie informationLicense:update/patch
WirelessDriver 1.0 Beta 6
WirelessDriver - Open source driver supporting Prism/Prism2 wireless cards for use with Mac OS X and the Darwin operating system more>> TwoRip DVD Ripper for Mac features:
1. Rip DVD on Mac Intel or Mac PowerPc.
2. Multi-threading and batch conversion to enable high speed ripping.
3. Complete control over program functions and easy-to-handle settings.
4. Rip and convert an entire DVD or select only the chapters you want.
5. It allows you to select target Audio track and subtitle.
6. It supports the edit function of ID3v1 and ID3v2 and enables you to edit music info for each file before ripping the DVD to MP3 or WMA.
TwoRip DVD Ripper for Mac is an ideal solution for ripping your DVD videos to popular Video and Audio formats. It combines the features of both a DVD Ripper and a DVD Audio Ripper which makes TwoRip DVD Ripper for Mac a full featured ripping software.
TwoRip DVD Ripper for Mac enables you to Rip DVDs to all popular Video formats including AVI, MPEG, MPG, WMV, DIVX, RM, MOV, FLV, 3GP, 3GP2, MP4, MP4 AVC and Audio formats such as MP3, WAV, WMA, AAC, AC3, M4A (AAC), OGG, RA, AU, etc.
TwoRip DVD Ripper for Mac is a professional program developed for Mac PowerPC and Mac Intel (including Mac OS X 10.5 Leopard) users and is the most powerful Mac DVD ripping software available on the market! Great features enable you to trim, select subtitle, select Audio track, split output files, set zoom method, set video brightness, contrast, saturation etc. Support multi-language. Convert DVD movie to any available language.
TwoRip DVD Ripper for Mac enables you to Rip your DVD Video to Video/Audio files and play them with your iPod, iPhone, 3GP phone, Zune, Apple TV, PSP, Xbox 360, PS3, iRiver, Creative Zen, Archos, PMP, Smart Phone, Pocket PC, PDA, mobile phone, MP4 Player, MP3 player, and other video and audio players. Just a few clicks and your ripping task is complete!<<less
iPhoto Batch Enhancer 3.0 Beta 6
Batch image enhancer for iPhoto. more>> Batch image enhancer for iPhoto.
iPhoto Batch Enhancer is designed to make your life with iPhoto even more comfortable.
It helps you apply the built in iPhoto effects (enhance, sepia, black-white, and more) with a few mouse clicks to a batch of photos.
Additionally you can perform changes to the Adjust palette as well as scale or rotate your photos.
System requirements:
-
Enhancements:
- Improved the detection of RAW image formats.
- Fixed an error with RAW images where saturation and tint were applied regardless of the checkboxes in the edit pane (Thanks to Jeff for finding the error).
- Improved update version comparison.
BlitzMax IDE 2.00 Beta 6 / 1.15
Integrated Development Environment for the programming language BlitzMax more>> Integrated Development Environment for the programming language BlitzMax
BlitzMax IDE is an Integrated Development Environment for the programming language BlitzMax including a program editor, debugger interface and help system.
This is the Community Edition of the BlitzMax IDE and it is based on the official IDE supplied with BlitzMax by Blitz Research Limited (BRL).BlitzMax IDE is entirely supported by the BlitzMax community.
Main features:
- Auto-complete: Whilst coding, you can press Control-Space at any time to auto-complete the current command. If there are several possible choices, a dropdown list is shown, otherwise the word is completed for you. At present, this only works on BlitzMax keywords.
- Auto-Tidy: This optional feature will try to make the code you write easier to read by ensuring consistent use fo whitespace. For example, spaces are added around commas. This behaviour can be turned off in the IDE options.
- Block comment / uncomment: An additional item is now available on the context menu within the editor, allowing you to comment or uncomment a section of code.
- Code Tree: The code tree has been improved signficantly to provide easy access to all of your code elements.
- To-Do List: Any line of code starting with TODO: , FIX: or BUG: will automatically be listed in the To-Do list. Double clicking on the item in the list will take you back to that line of code. This enables you to simply and easily mark areas of code that you need to come back to.
- Bookmarks: Like the todo list, you can add bookmarks to your code using MARK:, or using the context menu. You can easily move between bookmarks using the context menu or shortcut keys. Bookmarks are also listed in the To-Do List.
- Keyboard Shortcuts: A number of keyboard shortcuts have been added to improve your productivity. The Home key will now take you the first character on the line; press it again to go to the beginning of the line. Also, Shift+Home now works correctly for selecting text. The Back and Forward arrows now work within the editor screens. If you have used any of the code navigation aids (Code tree, To-Do list, bookmarks, etc), the arrows will now move you around between recently visited sections fo code.
- Debugging: When debugging, the CE IDE shows a green Continue button as well as a red Stop button, allowing you to re-start your program after it has been stopped.
- Modules: When synchronising modules, all known alternative modules are listed for optional synchronisation.
- Improved Help: The existing help documentation provided with BlitzMax for modules has been structured into logical groups. This enables new and experienced users alike to navigate quickly and easily through the BlitzMax commandset.
System requirements:
-
Enhancements
Added:
- Support for threaded build mode (thanks grable)
- Splash screen (copied and tweaked from official IDE)
- Test Harness to automatically test key elements of CE IDE before each release
Fixed:
- Layout of IDE Options & Find/Replace requesters improved, especially on non-win32 platforms
- Project manager properties fixed to only react to mouse clicks on all platforms
- Keypresses now detected when changing hotkeys on Linux
- New files no longer start out with a carriage return
- Auto-tidy code no longer adds an extra space on the end of some lines
- GTK not enabling / disabling menus when on a file tab (Brucey GTK fix)
- GTK errors & warnings & lockups on startup (Brucey GTK fixes)
Issues:
- Undo/Redo not completely behaving themselves
- There are still some small memory leaks that need to be pinned down
- Appear to be calling SyncDocs twice on startup (comment out line 1365 and still okay)
- Amend datanode code to ensure there is only ever 1 ref to treeviewnode & 1 free & never set text if node=null
- not macos section in RefreshView in datanodes freegadget being called twice according to markcw?
- Attempting to amend the root node - cant change name! (although GTK now ignores it)
- Resize Ok & Cancel buttons to 34/35 (check IDE options), and 28 for all other buttons
- Some tab & font size combinations give inconsistent text layout. This will be an issue until a new codearea is implemented, or BRL.MaxGUI.TGUIFont adds a width.
- LINUX & MACOS: Auto-complete doesnt show at cursor position on Mac or Linux due to no known means of obtaining graphical cursor position
- Linux/GTK: Unable to set hotkeys (awaiting Brucey GTK canvas KEYUP/KEYDOWN events fix)
- Linux/GTK: Not showing the memory window in debug compile of IDE (awaiting Brucey GTK Timer/EventHook fix)
- Linux/GTK: Unable to scroll hotkey list (awaiting Brucey GTK fix for tabbers)
- Linux/GTK: Find/Replace blanks textfields & hangs (awaiting Brucey GTK TextFieldText fix)
- Linux/FLTK: End a built app also ends/closes the IDE!
- Linux/FLTK: Flickery mouse when over IDE - occurs in official IDE too
Directory Synchronize Pro 1.0 Beta 6
Quickly synchronize the contents of one directory to another more>> Quickly synchronize the contents of one directory to another
Directory Synchronize Pro is a small and handy utility that you will always need! It is small, reliable, and fast. And best of all - it is Open Source; released under the GPL you are free to use and distribute it.
Directory Synchronize Pro synchronizes the contents of one directory to another. That means you can use it to backup your data on a regular basis to another computer or another harddrive. Or you can use Directory Synchronize to synchronize the data on your laptop with the data on your desktop.
Programmed in real platform independent Java, you can use Directory Synchronize Pro on nearly every computer platform including Macintosh, Windows, Linux.
Use the Directory Synchronize Pro GUI for starting, pausing and stopping a synchronization. Or use the GUI to easily create and store a configuration and use the command line to automatically start it every time you boot up your computer.
System requirements:
-
Enhancements:
- Fixed: Changing the default in-/excludes are now reflected to the directory settings when SameAsDefault is selected. (thanks to Fico to report)
- Fixed: In some cases the progress bars were not updated accurately.
- Fixed: On some fast machines with fast file systems the GUI seemed to be hanged during synchronization of massive number of small files.
- Fixed: Changing the default log caused extra logfile creations. This is fixed (Thanks to Yorick for the report)
- Changed: SwingWorker is being used from java.swingx now. As a result Java 1.6 or higher is required to run DirSyncPro.
- Added: Debug information for the excessive mode to show the default in-/exclude settings.
- Added: Internationalization feature is enabled. In the near future it would be possible to select a language for the GUI.
Aperture BorderFX 1.2.0 Beta 6 / 1.1.2
Allows you to add borders and watermarks to images when you export them. more>> Allows you to add borders and watermarks to images when you export them.
Aperture BorderFX is a free Aperture export plug-in that allows you to add borders and watermarks to images, and scale or crop them when you export them.
Main features:
- Option to draw the Watermark in the border.
- Add Titles and Copyright text.
- Top and bottom border can be adjusted independently to the sides.
- Option to apply a soft edge between the border and the photo.
- Blur and/or desaturate the image in the border.
- Add a watermark to exported images.
- Fit image within defined dimensions, adding borders to pad image.
- Commonly used output options can be saved as a preset, for quick access.
System requirements:
-
Enhancements
- Fixed an issue with the Dimension list defaulting to an empty list on new installations if the BorderFX Edit plug-in is used first.
